We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
304 stainless steel male tee, 3/8 inch NPT, 18 TPI threads, brushed metallic finish

Zoro Select

Zoro Select 304 Stainless Steel Male Tee 3/8 in NPT 18 TPI ZUSA-PF-7892

SKU CH-1QNE-FXA2D

A 304 stainless steel male tee with 3/8 inch NPT threads rated to 7,300 psi for air, gas, oil, water and steam systems

  • 304 stainless steel resists corrosion in air, gas, oil, water and steam
  • Male NPT threads on both ends create secure 3/8 in connections at 18 TPI
  • Rated to 7,300 psi for demanding industrial pressure systems
  • Meets ANSI B31.1 code and low-lead regulations for compliant installations
  • Requires separate sealant for leak-free joint assembly

Zoro Select 304 Stainless Male Tee

The Zoro Select 304 stainless steel male tee provides a 3/8 inch NPT threaded connection for small-diameter piping systems. It suits industrial maintenance technicians and plumbers joining air, natural gas, oil, potable water, or steam lines within rated limits. This fitting conforms to ANSI B31.1 standards and meets low-lead content regulations for compliant installations.

Thermals Noise and Power

As a passive stainless steel pipe fitting, this component generates no heat, produces no noise, and draws no electrical power during operation. Its 304 stainless steel construction resists corrosion across the compatible fluid types without active cooling or energy input. Performance depends entirely on correct sealing and system pressure management.

7300 psi Pressure Rating

The maximum operating pressure of 7,300 psi determines whether this tee matches the system design requirements. Installers must verify that the intended application stays within this limit under all operating conditions. Supplementary sealing components are required for proper assembly and leak-free performance.

Highlights

  • 304 stainless steel resists corrosion in air, gas, oil, water and steam
  • Male NPT threads on both ends create secure 3/8 in connections at 18 TPI
  • Rated to 7,300 psi for demanding industrial pressure systems
  • Meets ANSI B31.1 code and low-lead regulations for compliant installations
  • Requires separate sealant for leak-free joint assembly

Specifications

BrandZORO SELECT

Questions about this item

How do I install the ZUSA-PF-7892 tee and what sealing step is often missed?

Thread the 3/8 inch NPT male ends into matching female ports using a suitable pipe sealant or PTFE tape; the fitting itself requires supplementary sealing components to prevent leaks.

Will the 304 stainless steel tee need replacement due to corrosion or wear?

304 stainless steel resists corrosion in air, natural gas, oil, potable water and steam within rated limits, so replacement is only needed if mechanical damage or extreme chemical attack occurs.

What pressure limit will I hit first when running the tee continuously at 7,300 psi?

The maximum operating pressure is 7,300 psi; sustained operation at this rating is the primary limit, provided temperature and media stay within ANSI B31.1 design conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.