Zoro Select
Zoro Select 220190 90 Degree Elbow 2in Female Socket Cast Iron
A 90-degree cast-iron elbow with 2-inch female socket ends for changing pipe direction
- 90-degree cast-iron elbow redirects flow in tight spaces
- Female socket on both ends accepts 2-inch pipe without threading
- Class 20 gray cast iron resists corrosion in drainage systems
- Bitumen coating adds extra protection against moisture and soil acids
- Zero-pressure rating suits gravity-fed waste and vent lines
Zoro Select 220190 Cast Iron Elbow
The Zoro Select 220190 is a 90-degree elbow fitting made from gray cast iron with a bitumen coating. It features a 2-inch female socket connection on both ends designed for joining pipe sections. The fitting meets Class 20 specifications and is supplied in new condition.
Suits gravity drainage and low-pressure systems
This elbow suits installers joining two-inch pipes in gravity-fed drainage or vent lines where a 90-degree change of direction is required. The female socket ends accept plain-end pipe for solvent weld or mechanical joint assembly. It is not for pressurised systems because the maximum operating pressure is listed as 0 psi.
Class 20 wall thickness for standard drainage loads
The Class 20 rating provides adequate wall thickness for typical residential and light commercial drainage loads. The bitumen coating adds a layer of corrosion protection during storage and installation. Headroom ends at any application requiring pressure containment or pipe schedules not compatible with the 2 13/32-inch socket depth.
Highlights
- 90-degree cast-iron elbow redirects flow in tight spaces
- Female socket on both ends accepts 2-inch pipe without threading
- Class 20 gray cast iron resists corrosion in drainage systems
- Bitumen coating adds extra protection against moisture and soil acids
- Zero-pressure rating suits gravity-fed waste and vent lines
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What size pipe must I already have for the 2 in female socket to fit?
The elbow accepts a 2 in pipe that matches the 2 13/32 in socket dimension.
Will the cast iron bitumen finish join cleanly to older grey cast iron pipe?
Both are grey cast iron so the material is compatible for a standard joint.
How can I confirm the 90 degree bend is seated correctly after assembly?
The joint should show a uniform 90 degree turn with the socket fully engaged on the pipe.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



