We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zoro Select

Zoro Select 20PJ14 Packaging Tape 1 in x 60 yd 6.1 mil Kraft

SKU CH-C338-M1E8K

Kraft packaging tape, 1 in wide by 60 yd long, 6.1 mil thick with rubber adhesive rated at 33 lb/in tensile strength and 80 oz/in adhesion, usable from 60 to 150 °F

  • Strong holding power with 33 lb/in tensile strength
  • Reliable adhesion delivering 80 oz/in adhesive strength
  • Performs from 60 to 150 Degrees F
  • Meets ASTM D6123 and FDA CFR 21 standards
  • 60-yard roll provides 55 metres of coverage

Zoro Select 20PJ14 Packaging Tape

This packaging tape uses a rubber adhesive on a Kraft backing. It measures 1 inch wide by 60 yards long with a thickness of 6.1 mil. The roll meets ASTM D6123 and FDA regulations for general sealing tasks.

Capacity and temperature limits

Tensile strength reaches 33 lb per inch and adhesive strength is 80 ounces per inch. It performs reliably between 60 and 150 degrees Fahrenheit. Extreme cold or heat outside this range will reduce holding power.

Upgrade from lighter tapes

This roll replaces thinner general-purpose tapes when stronger seals are needed for heavier cartons. The jump is worth it when packages exceed the holding capacity of standard 2 to 3 mil films.

Highlights

  • Strong holding power with 33 lb/in tensile strength
  • Reliable adhesion delivering 80 oz/in adhesive strength
  • Performs from 60 to 150 Degrees F
  • Meets ASTM D6123 and FDA CFR 21 standards
  • 60-yard roll provides 55 metres of coverage

Specifications

BrandZORO SELECT

Questions about this item

Will the 1 in wide roll feed through a standard hand-held dispenser I already own?

Yes, the 1 in width matches common dispenser cores so it will feed through a standard hand-held unit without modification.

How can I verify the seal is holding at the rated 33 lb/in tensile strength after application?

Apply firm pressure along the full length, then attempt to peel a corner; a clean, resistance-free release indicates the adhesive has not reached full bond, while strong resistance confirms the 33 lb/in rating is active.

Does the box include a dispenser or only the 60 yd roll of 6.1 mil Kraft tape?

Only the roll is included; a dispenser must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.