Zoro Select
Zoro Select 20PJ10 Masking Tape 1 1/2 in x 60 yd 4.8 mil Tan
Crepe-paper masking tape with rubber adhesive holds to 42 oz/in on steel and removes cleanly up to 150 °F
- Holds firmly on metal with 42 oz/in adhesion
- Clean removal from glass, metal, paint and wood
- Withstands heat up to 150 Degrees F
- 60 yard roll covers large masking jobs
- 8 mil crepe paper backing resists tearing
Zoro Select 20PJ10 Masking Tape Specifications
This Zoro Select 20PJ10 masking tape measures 1 1/2 inches wide by 60 yards long with a 4.8 mil thickness. The tan crepe paper backing uses a rubber adhesive rated at 42 oz/in adhesion to steel. It suits assembly, manufacturing, construction and general maintenance tasks.
Indoor Application and Clean Removal Notes
Designed for indoor use on glass, metal, paint and wood surfaces. The tape operates between 60 and 150 degrees Fahrenheit. Clean removal time is not rated by the vendor, so test on a small area before full application to avoid residue.
Project Requirements to Verify First
Confirm the 1 1/2 inch width and 60 yard length match your masking needs. Ensure the work environment stays within the 60 to 150 degree Fahrenheit range. Check that rubber adhesive on crepe paper suits the specific surface and duration of your job.
Highlights
- Holds firmly on metal with 42 oz/in adhesion
- Clean removal from glass, metal, paint and wood
- Withstands heat up to 150 Degrees F
- 60 yard roll covers large masking jobs
- 8 mil crepe paper backing resists tearing
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
How do I confirm the tape is performing correctly once applied?
The tape should bond to steel at 42 oz/in and release cleanly from glass, metal, paint or wood within the 60 °F to 150 °F range; check that edges stay flat and no residue remains on removal.
What comes in the box and what must I purchase separately?
You receive a single continuous roll of crepe-paper masking tape, 1 1/2 in wide by 60 yd long and 4.8 mil thick; no dispenser, cutter or additional adhesive is included.
Which version of the CP 106 series should I choose for my job?
The listed roll is the only CP 106 variant offered — 1 1/2 in x 60 yd, 4.8 mil, tan, rubber adhesive — so select it when those dimensions and temperature limits match your surface and environment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
