Zoro Select
Zoro Select 13G232 Analog Panel Thermometer 0-160°F
Analog panel thermometer measures 0 to 160 °F with a 3.5 in dial and 10 ft capillary
- ColorTransparent
- Analog dial reads 0-160 °F for quick temperature checks
- 5 in dial diameter gives clear visibility at a distance
- 304 stainless steel housing resists corrosion in harsh environments
- Polycarbonate lens protects the dial from impact and scratches
- 1/2 in MNPT with 10 ft cable allows flexible panel mounting
HVAC panel thermometer for 0–160 °F monitoring
The Zoro Select 13G232 is an analog panel-mount thermometer built for HVAC technicians and facility engineers who need a direct-reading instrument. Its transparent polycarbonate lens and 304 stainless steel housing suit indoor mechanical rooms and equipment panels. Condition is new and the unit ships directly from the manufacturer.
Temperature range 0 to 160 °F
The single specification that decides fit is the 0 to 160 degrees Fahrenheit scale, covering typical heating, ventilation and refrigeration loops. A 3.5 inch dial diameter provides clear visibility at a glance. No NIST-traceable certificate is included with this model.
10 ft cable with 1/2 in MNPT connection
The bundled 10 foot capillary cable terminates in a 1/2 inch male NPT fitting, allowing direct immersion in pipe tees or wells without extra adapters. Polycarbonate lens and 304 stainless steel housing resist condensation and minor chemical exposure in standard HVAC environments.
Highlights
- Analog dial reads 0-160 °F for quick temperature checks
- 5 in dial diameter gives clear visibility at a distance
- 304 stainless steel housing resists corrosion in harsh environments
- Polycarbonate lens protects the dial from impact and scratches
- 1/2 in MNPT with 10 ft cable allows flexible panel mounting
Specifications
| Brand | ZORO SELECT |
|---|---|
| Color | Transparent |
Questions about this item
What does the 0-160°F range tell me about everyday use?
The dial reads from freezing up to 160°F, covering most HVAC, refrigeration and light-industrial processes you would mount it in.
How does the 1/2 in MNPT connection limit installation?
The 1/2 inch male NPT thread screws directly into a matching female port; you need that exact thread size or an adapter to seal the probe.
What clearance does the 3.5 in dial and 10 ft cable need?
Allow at least 3.5 inches of panel cut-out diameter for the face and plan routing for a 10 foot capillary tube from the probe to the dial.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
