We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron submersible sewage pump with 2 inch discharge outlet

Zoeller

Zoeller N267 1/2 HP 2" 115V Manual Submersible Sewage Pump Trap

SKU CH-VDNC-E8V32 MPN N267

1/2 HP manual submersible sewage pump moves up to 85 gpm at 10 ft head with 2-inch solids handling

  • TypeDrain Components
  • Handles 2-inch solids with 1/2 HP motor
  • Delivers 85 gpm at 10 ft head for strong flow
  • Hermetically-sealed oil-filled motor resists moisture ingress
  • Cast iron body provides corrosion-resistant durability
  • Operates on standard 115V AC single-phase power

1/2 HP Submersible Sewage Pump

The Zoeller N267 is a 1/2 HP manual submersible sewage pump designed for residential and light commercial waste removal. It operates on 115V AC single-phase power and draws 10.40 A. The cast iron body and thermoplastic impeller handle solids up to 2 inches in diameter.

Manual Operation Requires External Control

This unit ships with no switch included, so an external float or control panel must be supplied by the installer. The hermetically sealed, oil-filled motor protects internal components from moisture. A 2 inch discharge outlet connects to standard piping for ejector or dewatering applications.

Replaces Failed Ejector Pumps in Existing Basins

The pump upgrades or replaces older 1/2 HP units that can no longer meet the 85 gpm flow rate at 10 ft of head or the 45 gpm rate at 15 ft. The jump is worth it when the current pump cannot clear 2 inch solids or when the carbon-ceramic shaft seal has worn out.

Highlights

  • Handles 2-inch solids with 1/2 HP motor
  • Delivers 85 gpm at 10 ft head for strong flow
  • Hermetically-sealed oil-filled motor resists moisture ingress
  • Cast iron body provides corrosion-resistant durability
  • Operates on standard 115V AC single-phase power

Specifications

TypeDrain Components
BrandZoeller
ModelN267

Questions about this item

How long can the 1/2 HP motor run continuously before the oil-filled housing overheats?

The hermetically sealed, oil-filled motor is designed for continuous duty; the oil acts as a coolant and insulator, allowing extended operation without thermal shutdown under normal sewage ejection cycles.

What is the typical noise level and motor temperature when pumping at 85 gpm against 10 ft of head all day?

The cast iron body and submerged operation suppress airborne noise; the oil-filled motor transfers heat directly to the pumped liquid, keeping external surface temperatures low during sustained 10.40 A draw.

Does the N267 include a float switch and check valve, or must I supply them separately?

No switch is included with the N267; you must provide a separate float switch or control panel for automatic operation, plus a 2 in discharge check valve to prevent backflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.