We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron submersible sewage pump, cylindrical body, 230 volt manual operation

Zoeller

Zoeller F267 1/2 HP 230V Manual Submersible Sewage Pump

SKU CH-5BF6-YXR8C MPN F267

A manual submersible sewage pump with a 1/2 HP hermetically-sealed motor that moves up to 85.0 gpm at 10 ft head and handles 2 in solids

  • TypeDrain Components
  • 1/2 HP motor delivers 85.0 gpm at 10 ft head
  • Cast iron body resists corrosion in sewage applications
  • Handles 2 in solids for reliable waste removal
  • Hermetically sealed oil-filled motor prevents fluid intrusion
  • 230V operation suits residential and light commercial installations

Manual Submersible Sewage Pump

The Zoeller F267 Waste-Mate is a manual submersible sewage pump built for residential and light commercial waste removal. Its hermetically sealed, oil-filled motor and cast iron body handle solids up to two inches in diameter. The unit operates on 230 volt single-phase power and requires a separate switch for automatic control.

Installers needing a durable non-automatic ejector

This pump suits installers who prefer to select their own float or pressure switch for a custom control setup. It fits basins of at least eighteen inches diameter and delivers strong flow at ten and fifteen feet of head. Buyers who want a pump with an integrated switch or automatic operation built in should look elsewhere.

230 volt manual operation with 1/2 HP motor

The motor runs on 230 volt AC single-phase power and draws 2.60 amps, a key figure for sizing the electrical supply and breaker. No switch is included, so the installer must provide the actuation method. This voltage and manual configuration determine whether the unit matches the site wiring and control scheme.

Highlights

  • 1/2 HP motor delivers 85.0 gpm at 10 ft head
  • Cast iron body resists corrosion in sewage applications
  • Handles 2 in solids for reliable waste removal
  • Hermetically sealed oil-filled motor prevents fluid intrusion
  • 230V operation suits residential and light commercial installations

Specifications

TypeDrain Components
BrandZoeller
ModelF267

Questions about this item

Does the Zoeller F267 include a float switch or do I need to buy one separately?

The pump is supplied without a switch; no switch is included in the box, so a separate float switch must be purchased for automatic operation.

How do I decide between the 10 ft, 15 ft and 20 ft head ratings when sizing the F267?

Match the pump to your system's total dynamic head: at 10 ft it delivers 85.0 gpm, at 15 ft it delivers 45.0 gpm, and at 20 ft it delivers 10.0 gpm.

What does the 85.0 gpm at 10 ft head mean for actual basement drainage performance?

It means the pump can move 85 gallons per minute when lifting wastewater through 10 feet of vertical head, suitable for typical residential sewage ejection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.