We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey cast iron submersible sump pump with vertical float switch and 1 1/2 inch discharge outlet

Zoeller

Zoeller 98-0001 submersible sump pump 1/2 HP 115V 61 gpm

SKU CH-8WGP-X2BZB

Submersible sump pump with a vertical float switch delivering 61 gpm at 10 ft head and a maximum head of 23 ft

  • 1/2 HP motor delivers 61 gpm at 10 ft head
  • Vertical float switch activates automatically at 7 1/4 in water level
  • Cast iron body resists corrosion for long service life
  • Carbon ceramic shaft seal protects motor from water intrusion
  • 23 ft maximum head handles deep sump installations

1/2 HP Submersible Sump Pump

The Zoeller 98-0001 is a 1/2 HP submersible sump pump rated for 115V AC at 60 Hz and drawing 9.4 A. It features a vertical float switch with integral electrical connection and activates at 7 1/4 in, shutting off at 3 in. The cast iron body and plastic impeller suit residential basement drainage.

Suits shallow pits with vertical float clearance

This pump fits pits of at least 18 in diameter and needs room for the vertical float to move freely between the 3 in off point and 7 1/4 in on point. Installations with narrower pits or tight clearances that block float travel should consider a different switch style.

61 gpm at 10 ft head decides fit

At 10 ft of head the pump delivers 61 gpm, dropping to 45 gpm at 15 ft and 25 gpm at 20 ft, with a maximum head of 23 ft. Match these flow-versus-head points to your discharge height and required volume to confirm the pump meets the job.

Highlights

  • 1/2 HP motor delivers 61 gpm at 10 ft head
  • Vertical float switch activates automatically at 7 1/4 in water level
  • Cast iron body resists corrosion for long service life
  • Carbon ceramic shaft seal protects motor from water intrusion
  • 23 ft maximum head handles deep sump installations

Specifications

BrandZOELLER

Questions about this item

How often will the carbon-ceramic shaft seal need replacement?

The carbon-ceramic shaft seal is a wear part; plan to inspect it annually and replace it if leakage appears around the motor shaft.

What head height limits the 61 gpm flow rate?

At 10 ft of head the pump delivers 61 gpm; flow drops to 45 gpm at 15 ft and 25 gpm at 20 ft, with a maximum head of 23 ft.

How hot does the motor run during continuous operation?

The 1/2 HP, 115 V motor draws 9.4 A and is designed for submersible cooling; the surrounding water keeps operating temperature within safe limits during extended runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.