ZIBOO
ZIBOO NTN 6916 LLU Deep Groove Ball Bearings 80x110x16mm
Deep groove ball bearing measuring 80 by 110 by 16 millimetres with LLU seals
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precise 80x110x16mm fit for reliable rotation
- LLU double-seal design keeps contaminants out
- NTN 6916 series built for consistent performance
- Single-box pack simplifies inventory management
- Red finish allows quick visual identification
NTN 6916 LLU Deep Groove Bearing
The NTN 6916 LLU is a deep groove ball bearing measuring 80x110x16mm and supplied as a single pack in a box. It is intended for maintenance and assembly tasks where a sealed rolling-element bearing is required. The red finish distinguishes the unit visually in a toolkit or stores bin.
Replaces worn or contaminated 6916 bearings
When an existing 6916 bearing shows excess play, noise or seal failure, this unit restores the original running clearance and contamination protection. The jump is worth it whenever the surrounding housing and shaft dimensions remain within the 80mm bore and 110mm outside diameter specification.
Suits technicians servicing equipment
Mechanics and electricians who need a direct drop-in for the 6916 size will find the LLU sealing arrangement matches the original specification. Buyers requiring a different bore, outside diameter, width or seal type should look at something else.
Highlights
- Precise 80x110x16mm fit for reliable rotation
- LLU double-seal design keeps contaminants out
- NTN 6916 series built for consistent performance
- Single-box pack simplifies inventory management
- Red finish allows quick visual identification
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6916 LLU |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What shaft and housing diameters match the 80x110x16mm dimensions of the NTN 6916 LLU bearing?
The bearing has an 80 mm bore for the shaft, a 110 mm outer diameter for the housing, and a 16 mm width. Verify shaft and housing tolerances before assembly.
Which side of the NTN 6916 LLU goes in first when pressing it onto the shaft?
Press only the inner ring onto the shaft using a sleeve that contacts the inner race. Never transmit force through the outer ring or the red seals, or the bearing will be damaged.
How often should the NTN 6916 LLU be relubricated or replaced in continuous service?
The LLU seals are designed for life lubrication. Inspect for noise, heat or seal wear at regular intervals; replace the unit if any of those conditions appear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
