We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ZIBOO

ZIBOO NTN 6826 Single Row Radial Ball Bearing Open Type 130x165x18mm

SKU CH-SM56-RTQ37

Single row radial ball bearing with open design, 130x165x18 mm dimensions

  • Radial load handling with single-row ball design
  • Open type allows easy lubrication access
  • 130 mm bore fits standard shaft sizes
  • 165 mm outer diameter matches housing specs

ZIBOO NTN 6826 Radial Ball Bearing

This open-type single-row radial ball bearing is manufactured by ZIBOO under the NTN 6826 designation. It suits electricians and maintenance technicians who require a standard replacement bearing for motor shafts, pulleys or gearboxes in workshop equipment. The open design allows direct lubrication access during routine service intervals. Buyers needing sealed or shielded variants for contaminated environments should select a different bearing type.

Thermals noise and power draw

As a passive rolling-element component, the bearing generates no electrical noise and draws no power during operation. Frictional heat remains low at typical rotational speeds when the correct lubricant is applied and maintained. Operating temperature is governed by the surrounding machinery and ambient conditions rather than the bearing itself. Regular inspection and relubrication keep thermal output and acoustic signature within normal limits.

Highlights

  • Radial load handling with single-row ball design
  • Open type allows easy lubrication access
  • 130 mm bore fits standard shaft sizes
  • 165 mm outer diameter matches housing specs

Specifications

BrandZIBOO
ModelNTN 6826

Questions about this item

How do I press the 130x165x18mm bearing onto the shaft without damaging the balls?

Apply even force only to the inner ring using a bearing driver or sleeve that matches the 130 mm bore; never hammer the outer ring or the cage.

When should I plan to re-lubricate or replace the open-type NTN 6826?

Re-grease through the open sides every few thousand hours or when noise rises; replace once radial play exceeds the manufacturer's limit for the 6826 series.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.