ZIBOO
ZIBOO NTN 6332 Single Row Radial Ball Bearing 160x340x68mm
Single-row radial ball bearing with 160 mm bore, 340 mm outer diameter and 68 mm width
- Open design simplifies lubrication and inspection
- 160 mm bore fits standard shaft sizes
- 340 mm outer diameter supports heavy radial loads
- 68 mm width provides high load capacity
NTN 6332 radial ball bearing for maintenance
The NTN 6332 is a single-row radial ball bearing supplied in an open configuration. It suits technicians and maintenance teams replacing worn bearings in electric motors, pumps, gearboxes and similar rotating equipment.
Open design simplifies inspection and relubrication
The open type allows direct visual checks and easy grease replenishment during scheduled servicing. With no integral seals or shields, running friction remains low and heat build-up is reduced in normal operation. Power draw of the host machine is unaffected by the bearing itself.
Highlights
- Open design simplifies lubrication and inspection
- 160 mm bore fits standard shaft sizes
- 340 mm outer diameter supports heavy radial loads
- 68 mm width provides high load capacity
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6332 |
Questions about this item
How is the ZIBOO NTN 6332 bearing installed and which step is often done incorrectly?
Press the 160 mm inner ring squarely onto the shaft using a sleeve that contacts only the inner race; tapping the outer race or using a hammer directly on the 340 mm outer diameter brinells the rolling elements.
What maintenance or replacement will the NTN 6332 open-type bearing need later?
Because the 6332 model is open on both sides, plan regular re-lubrication with the correct grease volume and inspect for contamination; replace once radial play exceeds the application limit or noise appears.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
