ZIBOO
ZIBOO NTN 6316 LLU Deep Groove Ball Bearings 80x170x39mm
Deep groove ball bearing measuring 80 by 170 by 39 millimetres with dual-contact seals for electrician tools
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Deep-groove design handles radial and axial loads
- LLU seals keep contaminants out and lubricant in
- 80 mm bore fits standard shaft dimensions
- 170 mm outer diameter matches common housing sizes
- 39 mm width provides high load capacity
ZIBOO NTN 6316 LLU Deep Groove Ball Bearing
The ZIBOO NTN 6316 LLU is a deep groove ball bearing designed for rotary applications requiring radial load support. It suits maintenance engineers and technicians replacing worn bearings in electric motors, pumps or gearboxes where the 80x170x39mm envelope matches the housing.
Installation fit and common issues
Press the bearing onto the shaft using a sleeve that contacts only the inner ring to avoid brinelling the raceways. Ensure the housing bore is clean and within tolerance so the outer ring seats squarely. Misalignment or hammer blows on the rings are the usual causes of premature noise and reduced service life.
Critical specification for selection
The bearing carries the NTN 6316 LLU designation with boundary dimensions of 80mm bore, 170mm outside diameter and 39mm width. Verify these three figures against the machine drawing or the original part marking before ordering to confirm interchangeability.
Highlights
- Deep-groove design handles radial and axial loads
- LLU seals keep contaminants out and lubricant in
- 80 mm bore fits standard shaft dimensions
- 170 mm outer diameter matches common housing sizes
- 39 mm width provides high load capacity
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6316 LLU |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How can I confirm the 80x170x39mm bearing is seated correctly after installation?
Verify smooth rotation without binding and measure the 80mm inner diameter, 170mm outer diameter and 39mm width to match the NTN 6316 LLU specification.
What comes in the box and what must I source separately for the NTN 6316 LLU?
The box contains one pack of the red deep-groove ball bearing; mounting hardware, lubricant and any press tools are not included.
Which version of the 6316 series should I choose for a standard fit?
Select the LLU variant with the 80x170x39mm dimensions for the standard deep-groove ball bearing configuration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
