ZIBOO
ZIBOO NTN 6220 LLU Deep Groove Ball Bearings 100x180x34mm electrician tool
Deep groove ball bearing sized 100x180x34mm with LLU seals for electrician tool applications
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Deep groove design handles radial and axial loads
- 100 mm bore fits standard shafts
- 180 mm outer diameter matches housing specs
- 34 mm width ensures stable fit
- NTN 6220 LLU model built for electrician tools
ZIBOO NTN 6220 LLU Bearing
This ZIBOO NTN 6220 LLU is a deep groove ball bearing measuring 100x180x34mm. It is sold as a single unit in a box with a red finish. The bearing is classified as test equipment for electrician tool applications. It carries a three-year parts and one-year labor warranty.
Suitable for precision radial loads
Mechanics needing a 100mm bore deep groove bearing with dual seals will find this part fits the requirement. The LLU suffix indicates contact seals on both sides for contamination protection. Buyers requiring a different bore diameter, open shielding, or a tapered roller design should look at other listings. This item is not for axial-load-only applications.
100mm bore, 180mm outer diameter, 34mm width
The decisive specification is the 100x180x34mm boundary dimensions. These three figures determine whether the bearing seats correctly on the shaft and inside the housing. Verify the shaft tolerance and housing fit against these exact measurements before ordering. No other dimension in the data affects interchangeability.
Highlights
- Deep groove design handles radial and axial loads
- 100 mm bore fits standard shafts
- 180 mm outer diameter matches housing specs
- 34 mm width ensures stable fit
- NTN 6220 LLU model built for electrician tools
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6220 LLU |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What size shaft does the 100 mm bore of the 6220 LLU bearing fit?
The 6220 LLU bearing has a 100 mm inner diameter, so it is designed for a 100 mm shaft.
Can the 180 mm outer diameter of the 6220 LLU replace a smaller bearing in the same housing?
No, the 6220 LLU has a 180 mm outer diameter and requires a housing bored to that size; a smaller housing will not accept it.
How can I confirm the 6220 LLU bearing is seated correctly after installation?
Rotate the inner ring by hand; it should turn smoothly with no binding or rough spots, indicating the 34 mm wide bearing is properly seated.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
