ZIBOO
ZIBOO NTN 6219 LLU Deep Groove Ball Bearings 95x170x32mm
Deep groove ball bearing measuring 95x170x32mm with double-contact seals for electrician tool applications
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Deep groove design handles radial and axial loads
- NTN 6219 LLU model ensures precise fit
- 95 mm bore matches standard shaft sizes
- 170 mm outer diameter suits common housings
- 32 mm width provides stable load distribution
NTN 6219 LLU Deep Groove Ball Bearings
The NTN 6219 LLU is a deep groove ball bearing measuring 95x170x32mm. It is designed for electricians and maintenance professionals who need reliable rotational components for motor repair or equipment servicing. The red finish and sealed LLU design help protect against contaminants in workshop environments.
Replacing worn or noisy bearings in electric motors
This bearing replaces units that have developed excess play, vibration or heat during operation. The upgrade is worth it when existing bearings show signs of seal failure or lubricant loss that cause premature wear. The 3-year parts coverage supports planned maintenance cycles rather than emergency swaps.
Sealed construction sustains performance under
The LLU seals retain lubricant and exclude dust during extended run periods. This reduces the relubrication frequency compared with open or shielded alternatives. Steady operating temperatures are maintained because the seal geometry limits churning losses at constant speed.
Highlights
- Deep groove design handles radial and axial loads
- NTN 6219 LLU model ensures precise fit
- 95 mm bore matches standard shaft sizes
- 170 mm outer diameter suits common housings
- 32 mm width provides stable load distribution
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6219 LLU |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What shaft diameter does the 95 mm bore of the NTN 6219 LLU bearing fit?
The 95 mm bore is designed for a 95 mm shaft, so the shaft must measure 95 mm for a proper press fit.
How do I install the NTN 6219 LLU bearing without damaging the red seals?
Press only on the inner ring using a sleeve that matches the 95 mm bore; pressing on the outer ring or the seals will damage the LLU contact seals.
When should I replace the NTN 6219 LLU bearing in continuous service?
Plan replacement after the 3-year parts coverage period or earlier if vibration, noise, or seal wear appears during inspection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
