We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ZIBOO

ZIBOO NTN 6030 ZZ Single Row Radial Ball Bearing 150x225x35mm

SKU CH-R1CS-AYP0R

Single-row radial ball bearing with 150 mm bore, 225 mm outer diameter and 35 mm width

  • Precision fit with 150 mm bore and 225 mm outer diameter
  • Sealed ZZ shields protect against dust and moisture ingress
  • Single-row radial design handles combined radial and axial loads
  • NTN 6030 ZZ engineering ensures reliable rotation at 35 mm width

NTN 6030 ZZ Radial Ball Bearing

The ZIBOO NTN 6030 ZZ is a single-row radial ball bearing designed for rotational applications requiring low friction and consistent performance. It suits maintenance engineers and technicians replacing worn bearings in electric motors, pumps, or industrial gearboxes where the 6030 series is specified.

150x225x35mm Dimensions and Load Capacity

With a 150mm bore, 225mm outer diameter and 35mm width, this bearing handles moderate radial loads and combined axial loads in both directions. The ZZ shields retain lubricant and exclude contaminants, though extreme speeds, heavy shock loads or misalignment will reduce service life.

Highlights

  • Precision fit with 150 mm bore and 225 mm outer diameter
  • Sealed ZZ shields protect against dust and moisture ingress
  • Single-row radial design handles combined radial and axial loads
  • NTN 6030 ZZ engineering ensures reliable rotation at 35 mm width

Specifications

BrandZIBOO
ModelNTN 6030 ZZ

Questions about this item

Will the 150x225x35mm dimensions of the ZIBOO NTN 6030 ZZ bearing match my existing shaft and housing tolerances?

The bearing has a 150mm bore, 225mm outside diameter and 35mm width; compare these three figures directly with your shaft and housing specifications to confirm fit.

How can I verify the ZZ shields on the NTN 6030 ZZ are seated correctly after installation?

After pressing the bearing into place, rotate the inner ring by hand — it should turn smoothly with no grinding, and both metal shields should sit flush against the outer ring without visible gaps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.