ZIBOO
ZIBOO IM18-05BPS-ZC1 electrician tool, 18 mm, 5 mm sensing, PNP, M12 4-pin, IP67
18 mm cylindrical proximity switch with 5 mm flush sensing range, PNP NO output, M12 4-pin connector and IP67 rating
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 5 mm flush sensing fits tight spaces
- PNP normally-open output simplifies wiring
- M12 4-pin connector speeds installation
- IP67 rating withstands water and dust
- 10 to 30 V DC supply suits industrial power
18 mm PNP proximity switch
The ZIBOO IM18-05BPS-ZC1 is a cylindrical inductive proximity switch with an M18 thread and a 5 mm flush sensing range. It operates on 10 V DC to 30 V DC supply voltage and provides a PNP normally-open output through a 4-pin M12 male connector. The nickel-plated brass housing meets IP67 enclosure rating for industrial environments.
Suits 5 mm flush detection; not for longer range
This switch suits automation tasks that require a 5 mm flush mounting detection distance and a 600 Hz switching frequency. It is not for applications needing a longer sensing range, a non-flush mounting style, an NPN output type, or a different connector format such as a cable tail or 3-pin connector.
5 mm flush sensing range decides fit
The single specification that decides whether this is the right part is the 5 mm flush sensing range combined with the PNP normally-open output function. If the machine design calls for a different sensing distance, output logic, or mounting style, this model will not match the requirement.
Highlights
- 5 mm flush sensing fits tight spaces
- PNP normally-open output simplifies wiring
- M12 4-pin connector speeds installation
- IP67 rating withstands water and dust
- 10 to 30 V DC supply suits industrial power
Specifications
| Brand | ZIBOO |
|---|---|
| Model | IM18-05BPS-ZC1 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What is the maximum ambient temperature the IM18-05BPS-ZC1 can handle during continuous operation?
The sensor operates continuously up to +70 °C ambient temperature, with a –25 °C lower limit for cold environments.
How much heat and electrical noise does the proximity switch generate when running all day?
Current draw is 20 mA at 10–30 V DC with a 1 V drop; the PNP output includes short-circuit, reverse-polarity and power-up pulse protection.
Which power supply and connector must already be in place for this M12 4-pin sensor to work?
A 10–30 V DC source and a matching M12 4-pin female cable or junction box are required for the DC 3-wire PNP output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
