ZIBOO
ZIBOO GTE6-N1212 Photoelectric Sensor NPN 10-30V DC 250mm Range IP67
A miniature photoelectric sensor with NPN output, 10–30 V DC supply, 250 mm sensing range and IP67 enclosure
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Compact 12 x 31.5 x 21 mm housing fits tight spaces
- 10-30 V DC supply works with standard industrial power
- PinPoint LED gives precise 7 mm spot at 90 mm
- 500 Hz switching frequency supports fast production lines
- IP67 enclosure resists dust and water ingress
Miniature Photoelectric Sensor
The ZIBOO GTE6-N1212 is a compact photoelectric proximity sensor designed for industrial detection tasks. It uses a visible red PinPoint LED to sense objects up to 250 mm away. The rectangular housing measures 12 mm by 31.5 mm by 21 mm and carries an IP67 enclosure rating. A stainless steel mounting bracket is included in the package.
Suits NPN Logic Systems
This sensor suits automation systems that require an NPN switching output with selectable light or dark switching modes. It operates on a 10 to 30 V DC supply with a 30 mA power consumption. Builders needing a PNP output type or a different connection format such as a plug connector should look at alternative models.
250 mm Sensing Range
The decisive specification is the 250 mm sensing range provided by the energetic detection principle. The sensor produces a 7 mm light spot at a 90 mm distance with a 650 nm wavelength. A mechanical spindle with five turns allows precise adjustment of the switching threshold for the application.
Highlights
- Compact 12 x 31.5 x 21 mm housing fits tight spaces
- 10-30 V DC supply works with standard industrial power
- PinPoint LED gives precise 7 mm spot at 90 mm
- 500 Hz switching frequency supports fast production lines
- IP67 enclosure resists dust and water ingress
Specifications
| Brand | SICK |
|---|---|
| Model | GTE6-N1212 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What voltage supply must my system provide for the GTE6-N1212 to operate?
The sensor requires a 10 V DC to 30 V DC supply with ripple within ± 10 %.
Will the 2 m PVC cable and 3-wire connection work with my existing NPN input module?
Yes, the cable provides a standard NPN output with a maximum load of 100 mA and selectable light or dark switching.
How can I verify the sensor is detecting correctly after mounting it?
Adjust the mechanical spindle over 5 turns until the visible red PinPoint LED spot of Ø 7 mm at 90 mm aligns with the target and the output toggles at the 250 mm sensing range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
