ZGSZJHF JH22-2F1 22mm IP67 Momentary Safety Switch Cover 2-Pack
Protects 22 mm panel-mount push buttons with an IP67-rated, spring-loaded cover that auto-closes and includes adhesive pads for desktop installation
- TypePanel Mount
- Amps5 amps
- Horsepower20
- Includesfalse
- Voltage12
- StylePush Button
- Fits 22 mm mounting holes on desktop PCs
- IP67 rating blocks water and dust ingress
- Spring-loaded cover closes automatically when released
- Double-sided adhesive tape included for tool-free mounting
- Two protective covers supplied in each pack
22 mm IP67 Momentary Safety Cover
This two-pack of ZGSZJHF JH22-2F1 covers fits a 22 mm round mounting hole on desktop PCs. The plastic shell carries an IP67 rating for waterproof and dustproof protection. A built-in spring forces the lid shut the moment hand pressure is released. Double-sided adhesive discs are included for surfaces where a threaded nut cannot be used.
Check hole size and button height
Verify that the panel cut-out measures 22 mm / 0.86 in before ordering. The internal cavity is 12 mm / 0.47 in deep, so the switch actuator must sit lower than that dimension. The cover footprint is 38 mm long by 34 mm wide and stands 19 mm / 0.74 in tall when closed. No nuts or tools are required if the adhesive discs are used.
Spring return under repeated use
Each press requires the operator to hold the lid open against the spring; the cover snaps back immediately on release. The momentary action prevents accidental long-term activation even if debris or a pet leans on the panel. IP67 sealing is maintained through the full travel because the gasket stays compressed while the lid is shut. The plastic housing resists impact during daily cycles.
Highlights
- Fits 22 mm mounting holes on desktop PCs
- IP67 rating blocks water and dust ingress
- Spring-loaded cover closes automatically when released
- Double-sided adhesive tape included for tool-free mounting
- Two protective covers supplied in each pack
Specifications
| Type | Panel Mount |
|---|---|
| Amps | 5 amps |
| Horsepower | 20 |
| Includes | false |
| Voltage | 12 |
| Style | Push Button |
| Material | Plastic |
| IP Rating | IP67 |
| Brand | ZGSZJHF |
| Model | JH22-2F1 |
| Features | Computers, Desktops with 22mm power button switch |
| Part Number | JH22-2F1 |
Questions about this item
What comes in the box and does the 22 mm switch itself have to be purchased separately?
The package contains two spring-loaded protective covers and two double-sided adhesive stickers. The 22 mm momentary push-button switch is not included and must be sourced separately.
How do I choose between the adhesive mounting and the nut-fixed method for my 22 mm panel hole?
If your switch is already secured with a nut in the 22 mm hole, install the cover directly without tape. If the switch lacks a nut, use the supplied double-sided stickers to bond the cover to the panel.
What does the IP67 rating mean when the cover is fitted on a live desktop power button?
The cover seals the 22 mm opening against dust ingress and survives temporary immersion up to one metre, so splashes or brief liquid exposure will not reach the underlying switch contacts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
