We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount PoE switch with 24 front ports and two uplinks

YuanLey

YuanLey 26 Port PoE Switch 24×100Mbps 2×Gigabit 400W Rackmount Unmanaged

SKU CH-6BHG-3Z7R1

26-port unmanaged PoE+ switch with 24×100 Mbps ports, 2×Gigabit uplinks and a 400 W budget

  • 24 PoE+ ports power cameras and access points directly
  • 400 W budget delivers up to 30 W per port
  • Two Gigabit uplinks provide 1000 Mbps backbone bandwidth
  • Extend mode reaches 250 m at 10 Mbps for long runs
  • Fan-cooled metal chassis operates from -10 °C to 55 °C

26-Port PoE Switch for IP Networks

The YuanLey switch delivers 24 PoE+ ports at 10/100Mbps and two Gigabit uplink ports at 1000Mbps. It supplies up to 400W total power budget with a maximum of 30W per port, compliant with IEEE 802.3af/at standards. The unit is built for rackmount installation in metal housing with industrial-grade fans and bilateral heat dissipation. It targets installers deploying IP cameras, wireless access points, VoIP phones or similar PoE-powered devices.

Plug-and-Play Setup with Extend Mode

Installation requires only connecting the supplied AC power cable and network cables; no configuration is needed thanks to automatic device detection and MDI/MDIX auto-negotiation. The package includes eight screws with nuts and two hanger brackets for rack mounting. A common issue is that the switch does not support passive PoE, so devices requiring that standard will not power up. Enabling extend mode drops port speed to 10Mbps but allows 250m cable runs and activates port isolation on ports 1 to 24 to reduce congestion.

Suits Small Surveillance

This switch suits installers who need many 100Mbps PoE ports and two Gigabit uplinks within a 400W budget, especially where VLAN isolation and long-distance runs up to 250m are required. It is not for buyers who need all ports at Gigabit speed, who require managed features such as SNMP or QoS, or who need passive PoE compatibility. Environments exceeding the 55°C operating limit should also consider other options.

Highlights

  • 24 PoE+ ports power cameras and access points directly
  • 400 W budget delivers up to 30 W per port
  • Two Gigabit uplinks provide 1000 Mbps backbone bandwidth
  • Extend mode reaches 250 m at 10 Mbps for long runs
  • Fan-cooled metal chassis operates from -10 °C to 55 °C

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the switch is operating correctly once connected?

The front panel LEDs show link status and PoE activity for each of the 24 ports plus the 2 Gigabit uplinks; a lit LED on a port means the connected device is powered and passing data at 100Mbps or 1000Mbps.

What ships with the unit and what must I source separately?

Included: 26-port PoE+ switch, AC power cable, 8 screws with nuts, 2 rackmount hangers, user manual. No SFP modules, patch cables or additional mounting rails are supplied.

Which port count and power budget suit my deployment?

This single model provides 24 PoE+ ports at 10/100Mbps, 2 Gigabit uplink ports and a 400W total budget with up to 30W per port; there are no alternative capacities or wattages to choose from.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.