We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal rackmount switch with 18 front ports and LED indicators

YuanLey

YuanLey 18 Port PoE Switch 16 PoE+ 100Mbps 2 Uplink Gigabit 250W

SKU CH-YY8J-XH3A9

An 18-port rackmount switch with 16 PoE+ ports at 100 Mbps, two gigabit uplinks and a 250 W budget

  • 16 PoE+ ports power IP cameras and access points up to 30 W each
  • 250 W built-in supply delivers 15.4 W simultaneously across all PoE ports
  • 2 Gigabit uplink ports provide 1000 Mbps backbone bandwidth
  • Extend mode pushes PoE reach to 250 m at 10 Mbps
  • VLAN isolation on ports 1-16 reduces congestion and improves security

18-Port PoE Switch with 16 PoE+ Ports

This 18-port switch provides 16 PoE+ ports at 10/100 Mbps and two Gigabit uplink ports at 1000 Mbps. It delivers up to 250 W total power budget with a built-in supply. Each port can supply up to 30 W while all ports share 15.4 W simultaneously. The unit is unmanaged and rack-mountable for plug-and-play deployment.

Check Power Budget and Uplink Needs

Verify that the 250 W total budget covers every connected device and that no single device exceeds 30 W per port. The 16 PoE ports run at 100 Mbps maximum, so confirm your cameras or access points do not require Gigabit speeds on those links. The two uplink ports provide 1000 Mbps for backbone connections. Ensure your cabling supports the required distances.

Suits IP Camera and Access Point Clusters

This switch fits installations powering multiple IP cameras, wireless access points or IP phones from a single rack unit with VLAN isolation on ports 1 to 16. Extend mode pushes single-port reach to 250 m at 10 Mbps for long runs. It is not for networks needing managed features, passive PoE support or Gigabit speed on every PoE port. Buyers needing higher per-port power or full Gigabit PoE should look elsewhere.

Highlights

  • 16 PoE+ ports power IP cameras and access points up to 30 W each
  • 250 W built-in supply delivers 15.4 W simultaneously across all PoE ports
  • 2 Gigabit uplink ports provide 1000 Mbps backbone bandwidth
  • Extend mode pushes PoE reach to 250 m at 10 Mbps
  • VLAN isolation on ports 1-16 reduces congestion and improves security

Specifications

No published specifications for this item yet.

Questions about this item

What cables and accessories come with the 18 port PoE switch and what must I buy separately?

The unit is a rackmount unmanaged switch with built-in 250 W power; network cables for the 16 PoE+ ports and 2 Gigabit uplinks are not included and must be purchased separately.

Should I choose the 100 Mbps PoE+ ports or the Gigabit uplink ports for my IP cameras?

Connect cameras to the 16 PoE+ ports which supply up to 30 W each at 10/100 Mbps; use the 2 Gigabit uplink ports for the network backbone where 1000 Mbps bandwidth is needed.

What does the 250 W total power budget mean when I plug in 16 cameras at once?

The 250 W budget is shared across all 16 PoE+ ports; each port can draw up to 30 W, but the combined load must stay within 250 W, so you can power roughly eight cameras at maximum draw or more at lower consumption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.