We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small spools of glow-in-the-dark PLA filament in green blue purple and rainbow colours

Yousu YS-Glowdark-1.75MM-4X250G-PACK A Glow PLA Filament 1.75mm 250g×4

SKU CH-RF3K-6VRB7

Four 250 g spools of 1.75 mm glow-in-the-dark PLA with ±0.03 mm accuracy for luminous prints

  • Color2-green/Blue/Purple/Rainbow Glow 250g*4
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Glow-in-the-dark prints after 30 minutes of light exposure
  • Four colours — green, blue, purple and rainbow — in one pack
  • Consistent feeding with 1.75 mm diameter and ±0.02 mm accuracy
  • Reliable results at 190–225 °C nozzle and 60 °C bed
  • 1 kg total filament across four 250 g spools

Glow PLA Filament Bundle

This pack contains four 250 g spools of 1.75 mm glow-in-the-dark PLA in green, blue, purple and rainbow colours. The filament uses phosphorescent material that charges under sunlight or UV light for about 30 minutes. It is aimed at hobbyists who want luminous prints for decorations, figurines or party accessories.

Sustained Printing Behaviour

The supplier notes the material is suitable for fast printing and large models with flat, smooth surfaces. Recommended print speed is 50 mm/s at 190–225 °C nozzle temperature and 60 °C bed temperature. High-speed modes are discouraged because the filament can soften and clog a 0.4 mm nozzle during long runs.

Thermal and Mechanical Characteristics

Dimensional accuracy is held to ±0.02–0.03 mm to promote consistent feeding and reduce warping. The formulation is described as problem-free with good bed adhesion and no jamming, blobs or layer delamination under normal settings. Total pack weight is 1 kilogram.

Highlights

  • Glow-in-the-dark prints after 30 minutes of light exposure
  • Four colours — green, blue, purple and rainbow — in one pack
  • Consistent feeding with 1.75 mm diameter and ±0.02 mm accuracy
  • Reliable results at 190–225 °C nozzle and 60 °C bed
  • 1 kg total filament across four 250 g spools

Specifications

BrandYousu
ModelYS-Glowdark-1.75MM-4X250G-PACK A
Color2-green/Blue/Purple/Rainbow Glow 250g*4
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

Does the glow-in-the-dark additive make the filament run hotter or draw more power during long prints?

No, the phosphorescent material only affects light absorption. You print at the same 190–225 °C nozzle and 60 °C bed temperatures as standard PLA, so heat output and power draw stay unchanged.

What printer hardware do I need before I can use these 1.75 mm spools?

A 3D printer that accepts 1.75 mm filament, a nozzle of 0.4 mm or larger, and a heated bed capable of 60 °C. The bundle includes four 250 g spools, so no extra filament is required to start.

Will the glow filament work reliably on an older Bowden-style printer that struggles with exotic materials?

Yes. The filament is manufactured to a ±0.03 mm diameter tolerance and is designed for problem-free feeding, low warping and good bed adhesion, so it prints cleanly on older Bowden setups at the recommended 50 mm/s speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.