Yosoo
Yosoo 4.3 Inch PLC Touch Screen HMI 600MHz ARM9 8MB DDR2 12 In 10 Out 2 in 1 Accessory
A 4.3 inch TFT LCD touch screen HMI with 600MHz ARM9 CPU, 8MB DDR2 memory, 12 inputs and 10 relay outputs for PLC control
- Quick setup with 130 by 80 mm cut-out and supplied screws
- 3 inch TFT LCD shows 480 by 272 pixels at 400 cd per m²
- 600 MHz ARM9 CPU with 8 MB DDR2 and 16 MB NAND flash
- IP65 front panel and IP20 rear shell protect against dust and water jets
- 12 digital inputs and 10 relay outputs suit various PLCs and controllers
Industrial HMI for PLC Systems
This 4.3 inch touch screen HMI serves as a human machine interface for PLCs and intelligent controllers with communication ports. The unit combines a TFT LCD display with relay outputs in a single accessory designed for industrial monitoring and control applications. Its low power consumption and fast operation suit automated equipment requiring reliable status visualisation.
Upgrade from Basic Indicator Panels
The jump is worth it when operators need interactive touch control instead of simple read-only displays. The 600MHz ARM9 processor with 8MB DDR2 memory and 16M NAND flash enables responsive screen updates and local logic handling. The 38.4kb download speed supports project transfers, while 12 digital inputs and 10 relay outputs replace separate I/O modules in compact installations.
Check Mounting and Communication Compatibility
Verify the 130x80mm cutout matches your enclosure dimensions and that the included screws suit the panel thickness. Confirm your controller supports the required communication port protocol for data exchange. The IP65 front panel and IP20 rear shell ratings determine suitability for your operating environment, and the 480x272px resolution with 400cd/m2 brightness must meet visibility needs.
Highlights
- Quick setup with 130 by 80 mm cut-out and supplied screws
- 3 inch TFT LCD shows 480 by 272 pixels at 400 cd per m²
- 600 MHz ARM9 CPU with 8 MB DDR2 and 16 MB NAND flash
- IP65 front panel and IP20 rear shell protect against dust and water jets
- 12 digital inputs and 10 relay outputs suit various PLCs and controllers
Specifications
No published specifications for this item yet.
Questions about this item
What panel cut-out dimensions does the 4.3 inch HMI need for mounting?
The unit fits a 130 by 80 mm rectangular cut-out and ships with the required mounting screws.
Which step is often missed when wiring the 12 inputs and 10 relay outputs?
Connect the communication port to the PLC or intelligent controller before powering the HMI, otherwise the 600 MHz ARM9 cannot establish the 38.4 kb download link.
How should the IP65 front panel be cleaned to maintain its seal?
Wipe the 480 by 272 pixel TFT LCD with a soft, damp cloth; avoid high-pressure jets or solvents that could degrade the gasket.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
