YINGHUA
YINGHUA X99-8M-T server motherboard LGA 2011-3 DDR3 M.2 NVME
Server motherboard with LGA 2011-3 socket, dual-channel DDR3, M.2 NVME, four SATA 3.0 ports and gigabit Ethernet
- CPU TypeIntel Atom
- Supports Intel Xeon E5 V3 CPUs via LGA 2011-3 socket
- Dual-channel DDR3 memory up to 1866 MHz on two slots
- M.2 NVMe interface for fast solid-state storage
- Four SATA 3.0 ports and one PCIe 3.0 x16 expansion slot
- Gigabit Ethernet with RTL8111H and 5.1 audio via ALC662
Server motherboard for specific Xeon E5 CPUs
The YINGHUA X99-8M-T board fits LGA 2011-3 sockets and accepts only the listed Xeon E5 V3 processors such as 2629V3, 2649V3, 2669V3, 2673V3, 2676V3, 2678V3 and 2696V3. It runs dual-channel DDR3 RECC memory at 1333, 1600 or 1866 MHz. An M.2 NVME slot and four SATA 3.0 ports handle storage. The H81 or B85 chipset ships at random.
Builders needing those exact V3 Xeons
This board suits technicians replacing a failed server board or assembling a budget workstation around the supported CPUs. Buyers who want more storage lanes, additional memory channels or a different processor generation should look at something else. The random chipset assignment means features may vary between units.
Straightforward M-ATX installation
The 237 by 180 mm board mounts in standard M-ATX cases using a 24-pin and 8-pin power connector. Six-phase power delivery and an eight-layer PCB aid stability. Installers must verify the CPU is on the supported list; unsupported models will not post. A minimum 500 W power supply is advised by the manufacturer.
Highlights
- Supports Intel Xeon E5 V3 CPUs via LGA 2011-3 socket
- Dual-channel DDR3 memory up to 1866 MHz on two slots
- M.2 NVMe interface for fast solid-state storage
- Four SATA 3.0 ports and one PCIe 3.0 x16 expansion slot
- Gigabit Ethernet with RTL8111H and 5.1 audio via ALC662
Specifications
| CPU Type | Intel Atom |
|---|
Questions about this item
Which specific Xeon E5 V3 processors does this board support?
The board supports E5 2629V3, 2649V3, 2669V3, 2673V3, 2676V3, 2678V3 and 2696V3; other V3 models are not supported or untested.
Will my existing DDR3 1600 modules run at their rated speed on this motherboard?
Yes, the dual-channel memory controller supports DDR3 1333, 1600 and 1866 MHz, so 1600 modules operate at their rated frequency.
How can I verify the M.2 NVMe drive is detected after assembly?
Enter the BIOS and check the storage configuration screen; the NVMe device should appear alongside the four SATA 3.0 ports.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



