YINGHUA X79 M PRO server motherboard Xeon E5-2689 4×8 GB DDR3 RECC

Ready-to-run X79 platform

This YINGHUA X79 M PRO server motherboard arrives with an Intel Xeon E5-2689 processor installed and four 8 GB DDR3 RECC modules populating every memory slot. The board uses the LGA 2011 socket and is powered through a 24-pin plus 4-pin connector with a 7-phase design. It targets administrators who need a complete, tested system board without sourcing components separately.

Suits single-socket builds with fixed memory

The four-slot layout is fully occupied at 1866, 1600 or 1333 MHz, so the platform suits workloads that run within that capacity and do not require further memory expansion. Builders who need additional DIMM slots, a different memory standard or multi-socket scaling should evaluate alternative server boards that provide those options.

Single M.2 NVMe X4 3.0 slot for primary storage

One M.2 interface wired as PCI Express 3.0 X4 accepts an NVMe drive, while four SATA 2.0 ports remain available for supplementary disks. The storage configuration is therefore defined by that single high-speed NVMe connection alongside the older SATA interfaces.