YINGHUA
YINGHUA Up Down Compound One Flute Spiral Carbide Mill Tool Cutter 4X32X55mm
One-flute up-down carbide cutter for CNC routing of wood, acrylic, PVC and density board, 4 mm shank, 32 mm cut length, 55 mm overall
- TypeRight-Angle Drills
- One-flute up/down spiral compresses chips for clean edges in wood and acrylic
- Tungsten-steel carbide construction resists wear during CNC routing
- 4 mm shank fits 32 mm cutting length with 55 mm overall reach
- Suitable for acrylic, PVC, density board and wood board
- Single-piece router bit ready for industrial cutting use
Up-Down Compound Router Bit
The YINGHUA carbide mill cutter is a one-flute compression spiral bit designed for CNC routing. It cuts acrylic, PVC, density board and wood board with a clean top and bottom surface. The tool suits workshops needing precise edge quality on double-sided laminates.
Sustained Cutting Behaviour
Tungsten steel construction maintains edge hardness during extended passes through dense panel materials. The up-down flute geometry continuously evacuates chips toward the centre, reducing heat buildup in the cut zone. This allows consistent feed rates without frequent pauses for chip clearance.
Setup Checks Before Ordering
Verify your CNC spindle accepts a 4 mm shank and provides enough Z-travel for the 55 mm overall length. Confirm the collet or chuck can clamp the 32 mm cutting length without interference. Ensure your machine and work-holding are rated for industrial cutting only, as the tool is not for use by anyone under 18 years old.
Highlights
- One-flute up/down spiral compresses chips for clean edges in wood and acrylic
- Tungsten-steel carbide construction resists wear during CNC routing
- 4 mm shank fits 32 mm cutting length with 55 mm overall reach
- Suitable for acrylic, PVC, density board and wood board
- Single-piece router bit ready for industrial cutting use
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How much heat does the 4 mm carbide flute generate when routing dense board all day?
Tungsten-steel construction and the single-flute geometry evacuate chips quickly, keeping the cutter cooler during continuous passes in acrylic, PVC or wood.
What collet size must my CNC spindle accept for the 4 mm shank?
The tool has a 4 mm shank, so the machine needs a 4 mm collet or a compatible reducer sleeve to hold it securely.
Will the 55 mm overall length clear the gantry on my older desktop CNC router?
At 55 mm total length the bit fits most hobby and light-industrial gantries, but verify your Z-axis travel before purchasing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
