YINGHUA
YINGHUA Up Down Compound One Flute Carbide Mill Cutter 8X42X80mm
Carbide compression router bit cuts wood, acrylic and PVC cleanly on both faces
- TypeRight-Angle Drills
- Up-down flute design reduces tear-out on both faces of the workpiece
- Single-flute geometry clears chips efficiently for smoother cuts in wood and plastics
- Tungsten steel construction resists wear during extended CNC routing sessions
- 8 mm shank with 42 mm cutting length suits a wide range of board thicknesses
- 80 mm overall length provides reach for deeper profiling operations
Target User & Purpose
This carbide mill cutter is designed for CNC machinery operators who need precise cutting of acrylic, PVC, density board and wood board. The single-flute up-down spiral geometry provides compression cutting action for clean edges on both faces of the workpiece. It suits professional workshops and industrial environments where material versatility and tool longevity are required. The cutter replaces worn or damaged router bits in existing CNC setups.
Upgrade Considerations
This tool replaces standard straight-flute or single-direction spiral bits that can cause tear-out on the top or bottom surface of laminated materials. The up-down compound design is worth the change when you process double-sided boards or need reduced chip-out on both faces without flipping the workpiece. It also supersedes multi-flute cutters when chip evacuation in softer materials like wood or acrylic becomes problematic at higher feed rates.
Compatibility Checks
Verify that your CNC router or spindle accepts an 8 mm shank diameter and can accommodate an overall tool length of 80 mm with a 42 mm cutting length. Confirm the machine’s collet or tool holder is rated for carbide tools and that the spindle speed range suits single-flute carbide geometry. Ensure your workholding can secure the materials listed, as the compression action exerts force in both directions. The product is not for use by persons under 18 years of age.
Highlights
- Up-down flute design reduces tear-out on both faces of the workpiece
- Single-flute geometry clears chips efficiently for smoother cuts in wood and plastics
- Tungsten steel construction resists wear during extended CNC routing sessions
- 8 mm shank with 42 mm cutting length suits a wide range of board thicknesses
- 80 mm overall length provides reach for deeper profiling operations
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter fits the 8 mm carbide mill cutter?
The cutter has an 8 mm shank, so it requires an 8 mm collet or chuck on your CNC router.
How do I install the up-down spiral bit without damaging the flute?
Insert the shank fully into the collet, tighten evenly, and ensure the flute direction matches the feed; the common error is leaving the shank partially seated.
When should I replace this tungsten-steel router bit?
Replace it when the cutting edges show visible wear or chipping, or when cut quality on acrylic, PVC, density board or wood board deteriorates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
