YINGHUA
YINGHUA UP and Down Compression Milling Cutter 6X42X70MM
A two-flute compression end mill with up-cut and down-cut spirals for clean edges in wood and PVC, 18 mm shank, 42 mm cut length, 70 mm overall
- TypeRight-Angle Drills
- Two-flute up-and-down spiral gives clean compression cuts
- Tungsten steel construction resists wear during CNC milling
- Cuts wood, plywood, density board and particleboard
- 6 mm shank fits standard collets for quick tool changes
- Industrial-grade cutter not for users under 18 years
6X42X70MM Compression Cutter
This 6X42X70MM compression milling cutter has two up-and-down flutes made from tungsten steel. It is designed for CNC machinery to cut wood, plywood, density board, solid wood and particleboard. The single piece comes in an independent package. It provides a precise cutting experience for compatible routing tasks.
Suitable for CNC wood routing
This cutter suits operators running CNC machines who need compression cuts on listed wood-based materials. It is not for anyone under 18 years of age due to the bladed design. It is not intended for hazardous article cutting or non-industrial applications. Buyers needing different flute counts or shank dimensions should look elsewhere.
6X42X70MM tungsten steel dimensions
The critical specification is the 6X42X70MM tungsten steel construction with two compression flutes. This exact size and material determine compatibility with your CNC collet and the workpiece thickness you can process. Verify these measurements against your machine and application requirements before purchase.
Highlights
- Two-flute up-and-down spiral gives clean compression cuts
- Tungsten steel construction resists wear during CNC milling
- Cuts wood, plywood, density board and particleboard
- 6 mm shank fits standard collets for quick tool changes
- Industrial-grade cutter not for users under 18 years
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter does the 6X42X70MM cutter need for my collet?
The cutter has a 6 mm shank, so use a 6 mm ER collet or chuck.
How do I install the two-flute compression bit without snapping the carbide?
Insert the shank fully, tighten the collet nut to the maker’s torque, and start the spindle before the flutes touch the workpiece.
When should I replace this tungsten-steel end mill?
Replace it when the up-cut and down-cut edges show visible rounding or when cut quality on plywood and particleboard degrades.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
