YINGHUA
YINGHUA Two Flutes UP DOWN Cut Spiral Carbide Mill Cutter 3.175x22x45mm
Two-flute up-down spiral carbide cutter mills wood, plywood and particleboard with 3.175 mm shank, 22 mm cut length and 45 mm overall length
- TypeRight-Angle Drills
- Compression cut reduces tear-out on both faces with up-down flute geometry
- Tungsten steel construction resists wear for longer tool life in abrasive materials
- 175 mm shank fits standard collets for quick machine changes
- 22 mm cutting length handles thick stock in a single pass
- Suitable for wood, plywood, density board and particleboard cutting tasks
Precision CNC Mill Cutter
This two-flute carbide milling cutter measures 3.175 by 22 by 45 millimetres and is built from tungsten steel for precise material removal. It targets CNC operators and woodworkers who need a single compression bit for clean edges on both faces of the workpiece.
Up-Down Spiral Geometry
The opposing flute directions pull chips upward and downward simultaneously, compressing the material to prevent tear-out on the top and bottom surfaces. This geometry eliminates the need for separate up-cut and down-cut bits when machining double-sided panels.
3.175 mm Shank Diameter
The 3.175 millimetre shank decides whether this cutter fits your collet or tool holder; verify compatibility before purchase. Buyers with larger-shank tooling cannot use this bit without an adapter, which is not included.
Highlights
- Compression cut reduces tear-out on both faces with up-down flute geometry
- Tungsten steel construction resists wear for longer tool life in abrasive materials
- 175 mm shank fits standard collets for quick machine changes
- 22 mm cutting length handles thick stock in a single pass
- Suitable for wood, plywood, density board and particleboard cutting tasks
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
When should the 3.175 mm shank carbide cutter be replaced?
Replace the cutter when the two up-down flutes show visible dullness or chipping, or when cut quality on wood, plywood or particleboard deteriorates.
What limits continuous cutting with the 22 mm flute length?
Heat buildup in the tungsten-steel body and chip evacuation capacity of the 22 mm flutes are the first constraints during prolonged routing.
How much noise and heat does the cutter generate during all-day CNC routing?
Noise and heat depend on spindle speed, feed rate and workpiece material; the carbide design reduces vibration but no specific acoustic or thermal ratings are published.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
