YINGHUA
YINGHUA Two Flutes UP DOWN Cut Carbide Mill Cutter 4X17X45MM
Two-flute up-down spiral carbide cutter mills wood, plywood and particleboard with compression action
- TypeRight-Angle Drills
- Two-flute up/down spiral gives clean compression cuts in wood and PVC
- Tungsten-steel construction resists wear for longer tool life
- 45 mm overall length fits standard CNC collets
- 17 mm cutting depth handles thick panels in one pass
- Single-piece pack supplies one ready-to-use cutter for industrial cutting only
Two-flute compression cutter for CNC
This solid-carbide end mill uses opposing up-cut and down-cut spirals to compress the workpiece during milling, producing clean edges on both faces. The two-flute geometry provides efficient chip evacuation while maintaining rigidity. It is intended for CNC routing of wood-based panels and PVC sheet.
4 mm shank with 17 mm cutting length
The cutter has a 4 mm shank diameter and 17 mm flute length within an overall 45 mm length. Tungsten steel construction gives the hardness and wear resistance required for abrasive composites such as particleboard and density board. These dimensions decide whether the tool fits your collet and reaches the required depth.
Woodworkers and sign makers needing burr-free edges
Suited for operators cutting plywood, solid wood, particleboard or PVC on a CNC router where top and bottom surface finish matter. Not for hand-held drills, metal machining, or any application requiring a different shank diameter or longer reach than 17 mm.
Highlights
- Two-flute up/down spiral gives clean compression cuts in wood and PVC
- Tungsten-steel construction resists wear for longer tool life
- 45 mm overall length fits standard CNC collets
- 17 mm cutting depth handles thick panels in one pass
- Single-piece pack supplies one ready-to-use cutter for industrial cutting only
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How deep can the 17 mm flute cut in a single pass?
The 17 mm flute length sets the maximum depth of cut per pass; deeper slots require multiple passes.
What shank diameter does the 4 mm cutter need in the collet?
The 4 mm shank fits a 4 mm ER collet or a 4 mm drill chuck; match the collet to the shank for concentric grip.
Will the 45 mm overall length clear my CNC router Z-travel?
At 45 mm overall length, the cutter needs at least 45 mm of Z clearance plus workpiece thickness; measure your gantry height before buying.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
