YINGHUA
YINGHUA Two Flutes UP And DOWN Cut Spiral Carbide Mill Cutter 3.175X15X38MM
Two-flute up-and-down spiral carbide cutter in tungsten steel cuts wood, plywood and particleboard with compression action, 3.175 mm shank, 15 mm flute, 38 mm overall
- TypeRight-Angle Drills
- Two-flute up/down spiral gives clean compression cuts in wood and PVC
- Tungsten steel construction resists wear for long service life
- 175 mm shank fits standard CNC collets without adapters
- 15 mm cutting length handles thick panels in a single pass
- 38 mm overall length provides rigidity for stable milling
Tungsten-Steel Compression Cutter
This carbide mill cutter is built for CNC operators who need clean edges on both faces of the workpiece. The up-and-down spiral geometry compresses the material during the cut, reducing tear-out on plywood, solid wood and density board. It arrives new and ready for industrial routing tasks.
3.175 mm Shank Diameter
The shank measures 3.175 mm, so the collet or chuck must match that exact size for secure clamping. A mismatched holder will cause run-out and premature wear, making this single dimension the deciding factor for compatibility.
Two-Flute Geometry for Chip Clearance
Two flutes balance material removal with chip evacuation in wood, particleboard and PVC. The design frees up the toolpath from packing, allowing continuous feed without frequent stops to clear debris. The cutter is sold individually and requires a CNC spindle or router capable of accepting the 3.175 mm shank.
Highlights
- Two-flute up/down spiral gives clean compression cuts in wood and PVC
- Tungsten steel construction resists wear for long service life
- 175 mm shank fits standard CNC collets without adapters
- 15 mm cutting length handles thick panels in a single pass
- 38 mm overall length provides rigidity for stable milling
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How deep can the 15 mm flute length cut in a single pass?
The 15 mm flute length allows cutting depths up to that figure in wood, plywood and density board, limited by machine rigidity and chip clearance.
What shank diameter fits the 3.175 mm specification on my CNC collet?
The 3.175 mm shank matches standard 1/8 inch ER collets and shrink-fit holders used on hobby and light-industrial routers.
Will the 38 mm overall length clear my Z-axis travel and tool changer?
At 38 mm overall length, the cutter fits most compact gantry machines; verify your minimum tool-change height and spindle nose clearance before ordering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
