YINGHUA
YINGHUA Two Flutes Straight Slot End Milling Cutter 6X6X42X70
A two-flute carbide end mill sized 6X6X42X70 for CNC engraving and cutting wood, acrylic, PVC, nylon and resin
- TypeRight-Angle Drills
- Precise cutting for CNC engraving with tungsten steel construction
- Two-flute straight slot design removes chips efficiently during milling
- Suitable for acrylic, PVC, nylon, resin, wood and plywood
- 42 mm flute length and 70 mm overall length fit standard tool holders
- Industrial-grade carbide endmill withstands demanding machining operations
Tungsten Steel End Mill for CNC Wood Engraving
This two-flute straight-slot cutter is made from tungsten steel and measures 6X6X42X70. It is designed for precise engraving and cutting of wood, plywood, acrylic, PVC, nylon and resin on CNC machinery. The tool suits operators who need a single replacement end mill for detailed routing work. It is not intended for users under eighteen years of age or for hazardous material cutting.
Direct Replacement for Worn Carbide Router Bits
The cutter replaces a dull or damaged end mill in a CNC spindle to restore clean edge quality on the listed materials. The upgrade is worth it when the current bit leaves tear-out, burns the workpiece or loses dimensional accuracy on fine details. It does not suit buyers who need a multi-flute tool for heavy chip evacuation in metals or a larger shank diameter for high-torque industrial spindles.
Simple Collet Installation
The straight shank fits directly into a compatible ER collet or chuck; secure it firmly before starting the machine. Common issues include excessive run-out from a worn collet, premature wear if feed rates are too high for the material, and breakage when the tool is used on unsupported stock or outside the specified application range.
Highlights
- Precise cutting for CNC engraving with tungsten steel construction
- Two-flute straight slot design removes chips efficiently during milling
- Suitable for acrylic, PVC, nylon, resin, wood and plywood
- 42 mm flute length and 70 mm overall length fit standard tool holders
- Industrial-grade carbide endmill withstands demanding machining operations
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter does the 6X6X42X70 cutter need to fit my CNC collet?
The cutter has a 6 mm shank diameter, matching the first figure in the 6X6X42X70 specification, so it fits a standard 6 mm ER collet or shrink-fit holder.
How do I install the carbide end mill without snapping the flutes, and what step do people skip?
Clean the collet and shank, insert the tool until the 42 mm flute length clears the workpiece, then torque the collet nut to the holder manufacturer’s spec — skipping the cleaning step causes run-out and broken edges.
When should I replace the tungsten-steel cutter used for acrylic, PVC, nylon, resin, wood and plywood?
Replace it when the two straight flutes show visible chipping, the cutting edges feel dull on a fingernail test, or the tool starts burning the listed materials instead of shearing them cleanly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
