YINGHUA
YINGHUA Two Flutes Straight Slot End Milling Cutter 6X6X17X50
A two-flute carbide end mill for wood CNC engraving and cutting acrylic, PVC, nylon, resin and plywood
- TypeRight-Angle Drills
- Two-flute design for smoother wood engraving cuts
- Tungsten steel construction resists wear during CNC milling
- Cuts acrylic, PVC, nylon, resin and wood
- 17 mm cutting length suits detailed profiling
- Industrial-grade tool not for users under 18
YINGHUA Two Flute Carbide End Mill
This solid tungsten steel cutter has a 6 mm shank and 17 mm flute length with an overall length of 50 mm. Two straight flutes clear chips cleanly during CNC engraving and profiling. The tool is supplied new as a single piece for wood and plastic machining.
Suited for CNC wood, acrylic, PVC.
The right angle geometry and carbide construction suit fine detail engraving and shallow slotting in non-ferrous materials. It is not for metal cutting, heavy hogging or handheld router use. Buyers needing larger diameters, ball nose profiles or coolant through tools should look elsewhere.
Direct collet fit for 6 mm holders
Insert the shank fully, tighten the collet to the machine maker’s torque and verify runout before cutting. Common issues are insufficient clamp depth causing pull out and excessive feed rates snapping the flutes. The cutter is not for operators under 18 years of age.
Highlights
- Two-flute design for smoother wood engraving cuts
- Tungsten steel construction resists wear during CNC milling
- Cuts acrylic, PVC, nylon, resin and wood
- 17 mm cutting length suits detailed profiling
- Industrial-grade tool not for users under 18
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What CNC machine collet size matches the 6 mm shank of this end mill?
The cutter has a 6 mm shank, so it fits any CNC spindle or router collet that accepts 6 mm tooling.
Can I run this tungsten-steel cutter in a hand-held rotary tool that only reaches 18 000 rpm?
The tool is designed for CNC spindle speeds; running it at 18 000 rpm in a hand-held rotary tool may exceed safe chip-load limits and is not recommended.
How do I confirm the 17 mm flute length is cutting cleanly after installation?
Make a test pass in scrap wood or acrylic; a clean edge with no tear-out and consistent chip size shows the 17 mm flute is engaged correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
