YINGHUA
YINGHUA Two Flutes Straight Slot End Milling Cutter 6X6X12X50
Tungsten steel end mill with two straight flutes for CNC engraving and cutting wood, acrylic, PVC and similar materials
- TypeRight-Angle Drills
- Two-flute design clears chips fast for smooth CNC engraving
- Tungsten steel construction resists wear during prolonged cutting sessions
- 12 mm cutting length handles detailed acrylic and wood work
- 50 mm overall length fits standard CNC tool holders
- Suitable for users 18 years and older in industrial settings
Two-flute carbide end mill
The YINGHUA two-flute straight-slot end mill is a tungsten-steel rotary cutter built for CNC engraving and fine cutting. It handles acrylic, PVC, nylon, resin, wood and plywood in a single pass. The tool ships as one piece for immediate workshop use.
Right-angle drill interface limits
The cutter mounts in a right-angle drill chuck, so runout and torque depend on that drive system rather than a dedicated spindle. Depth of cut is constrained by the 12 mm flute length and the 50 mm overall length. Chip evacuation relies on the two-flute geometry without coolant provision.
Replaces worn carbide tooling
This mill replaces dull or chipped carbide end mills when cut quality drops on the listed materials. The jump is worth it when finish quality or tool life on plastics and wood becomes unacceptable. Not for buyers who need more flute length, larger diameters or a multi-tool set.
Highlights
- Two-flute design clears chips fast for smooth CNC engraving
- Tungsten steel construction resists wear during prolonged cutting sessions
- 12 mm cutting length handles detailed acrylic and wood work
- 50 mm overall length fits standard CNC tool holders
- Suitable for users 18 years and older in industrial settings
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I choose the 6 mm or 12 mm cutting length for my wood CNC job?
The 12 mm flute length gives a deeper single-pass cut in wood, acrylic, PVC, nylon, resin or plywood, while the 6 mm shank fits the collet on most hobby CNC routers.
What does the 50 mm overall length mean once the cutter is in the spindle?
The 50 mm total length leaves enough stick-out for standard router collets while keeping the carbide rigid enough for clean engraving and cutting passes.
Does the plain 6 mm shank work with a standard ER collet?
The straight 6 mm shank is designed for common ER collets used on hobby and light-industrial CNC routers, held by mechanical clamping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
