YINGHUA
YINGHUA Two Flutes Straight Slot End Milling Cutter 4X4X32X55
Two-flute carbide end mill cuts wood, acrylic, PVC and similar materials in CNC engraving work
- TypeRight-Angle Drills
- Two-flute design clears chips efficiently during CNC engraving
- Tungsten steel construction resists wear for longer tool life
- 4 mm cutting diameter suits detailed wood and acrylic work
- 32 mm flute length reaches deeper profiles in plywood and resin
- 55 mm overall length fits standard CNC collets and holders
YINGHUA Two-Flute Carbide End Mill
This new YINGHUA end mill is a two-flute straight-slot cutter made from tungsten steel for CNC engraving and fine cutting. It suits workshops and hobbyists who need precise material removal on a router or milling machine. The single-piece tool targets users working with softer substrates rather than heavy metal roughing. Buyers needing multi-flute geometry or coated variants for abrasive alloys should look elsewhere.
Fits standard collets for 4 mm shank tools
The 4 mm shank seats directly in compatible ER collets or shrink-fit holders without adapters. A 32 mm flute length provides reach for deep pockets while the 55 mm overall length keeps overhang short for rigidity. The straight-slot profile clears chips efficiently in plastics and wood, freeing the spindle from recutting debris. Shops without a 4 mm clamping option cannot use this cutter.
Tungsten steel holds edge in extended passes
Tungsten steel construction resists wear during long engraving cycles in acrylic, PVC, nylon, resin, wood and plywood. Two flutes balance chip evacuation and surface finish so the cutter runs steadily without loading up. The tool is rated for industrial cutting only and must not be operated by anyone under 18 years old. It is not designed for high-temperature alloys or interrupted heavy cuts.
Highlights
- Two-flute design clears chips efficiently during CNC engraving
- Tungsten steel construction resists wear for longer tool life
- 4 mm cutting diameter suits detailed wood and acrylic work
- 32 mm flute length reaches deeper profiles in plywood and resin
- 55 mm overall length fits standard CNC collets and holders
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How deep can the 32 mm cutting length go in a single pass?
The cutter has a 32 mm flute length, so the maximum depth per pass is 32 mm.
Will the tungsten steel body stay cool during continuous CNC routing?
Tungsten steel dissipates heat well, but sustained high-speed cuts in acrylic or hardwood will still warm the tool; use coolant or air blast for long runs.
What shank size must my CNC collet accept for this 4 mm cutter?
The shank diameter is 4 mm, so you need a 4 mm ER collet or equivalent holder.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
