YINGHUA
YINGHUA Two Flutes Straight Slot End Milling Cutter 3.175X3.175X25X45
A two-flute carbide end mill for CNC engraving and cutting wood, acrylic, PVC and similar materials
- TypeRight-Angle Drills
- Two-flute design clears chips efficiently for smooth cuts
- Tungsten steel construction resists wear during extended use
- 175 mm shank fits standard CNC collets directly
- 25 mm cutting length handles deeper passes in one go
- Suited for wood, acrylic, PVC, nylon and resin
Two-Flute Carbide End Mill for CNC Woodworking
This two-flute straight-slot end mill is made from tungsten steel and built for CNC engraving and cutting tasks. It suits hobbyists and small-shop operators who need a single, affordable cutter for detailed work in wood, plywood, acrylic, PVC, nylon and resin. The 3.175 mm shank and cutting diameter match common hobbyist collets.
Cutting Depth and Material Limits
The 25 mm flute length sets the maximum cutting depth in a single pass, so deeper pockets require multiple steps. Tungsten steel resists wear in abrasive composites but is not rated for ferrous metals or hardened alloys. The right-hand spiral geometry evacuates chips upward, which helps in plastics and wood but can lift thin workpieces if clamping is light.
Replaces Dull or Single-Flute Bits in Light-Duty
Swapping a worn single-flute bit for this two-flute cutter gives a smoother finish and faster feed rates in the listed non-ferrous materials. The upgrade is worthwhile when edge quality on acrylic or plywood matters more than maximum material removal rate. It does not suit high-volume production or steel milling.
Highlights
- Two-flute design clears chips efficiently for smooth cuts
- Tungsten steel construction resists wear during extended use
- 175 mm shank fits standard CNC collets directly
- 25 mm cutting length handles deeper passes in one go
- Suited for wood, acrylic, PVC, nylon and resin
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Should I choose the 3.175 mm shank or the 25 mm flute length for my CNC setup?
The cutter has a single 3.175 mm shank diameter and a 25 mm flute length; both dimensions are fixed on this tool.
What does the 45 mm overall length mean when the cutter is mounted in my spindle?
The 45 mm overall length sets how far the tool extends from the collet face, defining maximum reach and Z-axis clearance.
Does the straight-flute, two-flute carbide design limit the materials I can cut on a standard CNC router?
The two-flute straight-slot geometry in tungsten steel is suited for engraving and cutting acrylic, PVC, nylon, resin, wood and plywood.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
