YINGHUA
YINGHUA Two Flutes Straight Slot End Milling Cutter 3.175X3.175X22X45
Two-flute tungsten-steel end mill for precise CNC engraving and cutting of wood, acrylic, PVC, nylon, resin and plywood
- TypeRight-Angle Drills
- Two-flute design enables smooth chip evacuation in wood and plastics
- 175 mm shank fits standard CNC collets without adapters
- 22 mm cutting length handles deeper profiles in acrylic and plywood
- Tungsten-steel carbide construction resists wear during extended engraving runs
- 45 mm overall length provides rigid reach for detailed CNC work
Tungsten-Steel End Mill for CNC Engraving
This single-flute carbide cutter is designed for wood CNC engraving and fine cutting tasks. It suits hobbyists and small-shop operators who need a precise tool for detailed work in softer materials. The tungsten-steel construction provides the hardness required for clean edges on intricate patterns.
Two-Flute Straight Slot Geometry
The straight-slot, two-flute design promotes efficient chip evacuation during engraving passes. A 3.175 mm shank diameter fits common collets on desktop CNC routers without adapters. Carbide tips resist wear when profiling acrylic, PVC, nylon, resin, wood and plywood in daily use.
Cutting Depth Limited to 22 mm Length
The 22 mm flute length restricts maximum cutting depth in a single pass, so deeper pockets require multiple steps. Overall tool length of 45 mm leaves limited reach inside deep cavities or tall fixtures. Not suited for heavy stock removal or high-feed roughing on dense hardwoods or metals. Buyers needing longer reach or higher material-removal rates should select a different tool.
Highlights
- Two-flute design enables smooth chip evacuation in wood and plastics
- 175 mm shank fits standard CNC collets without adapters
- 22 mm cutting length handles deeper profiles in acrylic and plywood
- Tungsten-steel carbide construction resists wear during extended engraving runs
- 45 mm overall length provides rigid reach for detailed CNC work
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter does the 3.175 mm straight-slot end mill require in the collet?
The cutter has a 3.175 mm shank, so the collet or chuck must accept a 3.175 mm diameter to hold it securely.
How much flute length is available for cutting depth on this 22 mm flute end mill?
The flute length is 22 mm, giving that maximum depth of cut before the shank contacts the workpiece.
What is the correct way to clamp this carbide end mill in a CNC router to avoid run-out?
Insert the 3.175 mm shank fully into a matching collet, tighten the collet nut to the manufacturer’s torque spec, and verify concentricity before starting the spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
