YINGHUA
YINGHUA Two Flutes Straight Slot End Milling Cutter 3.175X3.175X17X38
Two-flute carbide end mill with 3.175 mm shank and 17 mm cutting length for wood, acrylic and plastics
- TypeRight-Angle Drills
- Two-flute design gives smooth cuts in wood and plastics
- Tungsten steel construction resists wear during CNC engraving
- 175 mm shank suits common collet sizes
- 17 mm flute length reaches shallow pockets
- 38 mm overall length fits compact tool holders
Two-flute carbide milling cutter for CNC engraving
This two-flute straight-slot end milling cutter is designed for CNC engraving and fine cutting of wood, plywood, acrylic, PVC, nylon and resin. The tungsten-steel construction provides hardness and wear resistance for detailed work. It is supplied as a single piece for use in compatible CNC machinery.
Shank and flute dimensions match 3.175 mm collets
The cutter has a 3.175 mm shank diameter and a 3.175 mm cutting diameter with a 17 mm flute length and 38 mm overall length. Installation requires a collet or chuck that accepts the 3.175 mm shank; ensure the tool is fully seated and secured before starting the spindle. Incorrect clamping or excessive run-out can cause vibration, poor surface finish or tool breakage.
Suitable for hobby and light-production CNC routing
This cutter suits operators engraving or cutting the listed non-ferrous materials on CNC routers with 3.175 mm tool holders. It is not intended for metal milling, heavy stock removal or use in hand-held drills. Buyers needing larger diameters, longer reach or different flute geometries should select alternative tooling.
Highlights
- Two-flute design gives smooth cuts in wood and plastics
- Tungsten steel construction resists wear during CNC engraving
- 175 mm shank suits common collet sizes
- 17 mm flute length reaches shallow pockets
- 38 mm overall length fits compact tool holders
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How can I confirm the 3.175 mm shank fits my CNC collet after installation?
Measure the shank with a caliper; it should read 3.175 mm and seat fully in a 3.175 mm ER collet without run-out.
What does the single-piece package contain and what must I supply separately?
The box holds one tungsten-steel two-flute cutter measuring 3.175×3.175×17×38 mm; you provide the CNC machine, appropriate collet, work-holding and dust extraction.
Which dimensions suit fine engraving in acrylic and plywood?
The 3.175 mm diameter with 17 mm flute length and 38 mm overall length is sized for detailed engraving and shallow profiling in acrylic, PVC, nylon, resin, wood and plywood.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
