YINGHUA
YINGHUA Two Flutes Straight Slot End Milling Cutter 3.175X3.175X15X38
Two-flute carbide end mill cuts wood, acrylic and plastics on CNC routers with a 3.175 mm shank and 15 mm cutting length
- TypeRight-Angle Drills
- Two-flute design clears chips efficiently for smoother wood engraving
- Tungsten steel construction resists wear during extended CNC cutting sessions
- 175 mm shank and 15 mm flute length suit fine-detail routing tasks
- 38 mm overall length fits standard collets on desktop CNC machines
- Cuts acrylic, PVC, nylon, resin, wood and plywood without changing tools
CNC milling cutter for wood and plastics
This tungsten-steel end mill has two straight flutes and a 3.175 mm shank. It is designed for engraving and cutting acrylic, PVC, nylon, resin, wood and plywood on CNC machinery. The cutter is sold new as a single piece for direct replacement of worn tooling.
Cutting thermals and power draw
Carbide construction resists heat buildup during continuous routing in wood and plastic. Two flutes evacuate chips efficiently, reducing friction and motor load on the spindle. The tool runs quietly in normal engraving passes because the straight-slot geometry minimises vibration.
Upgrade from worn or single-flute bits
Replace dull high-speed steel cutters that leave rough edges on acrylic or plywood. The jump is worth it when precision engraving demands clean chip evacuation and longer edge life in abrasive resins. Not for buyers who need ball-nose profiles, larger shank diameters or multi-flute roughing geometry.
Highlights
- Two-flute design clears chips efficiently for smoother wood engraving
- Tungsten steel construction resists wear during extended CNC cutting sessions
- 175 mm shank and 15 mm flute length suit fine-detail routing tasks
- 38 mm overall length fits standard collets on desktop CNC machines
- Cuts acrylic, PVC, nylon, resin, wood and plywood without changing tools
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I fit the 3.175 mm shank into my CNC collet without run-out?
Use a 3.175 mm precision collet, tighten the drawbar to the machine maker’s torque spec, and check run-out with a dial indicator before cutting.
When should I replace this tungsten-steel end mill?
Replace it when the two flutes show visible chipping, the cutter burns wood or acrylic, or dimensional accuracy drifts beyond tolerance.
What limits continuous cutting depth with the 15 mm flute length?
The 15 mm flute length sets the maximum depth per pass; deeper cuts need multiple passes to avoid tool deflection and breakage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
