YINGHUA
YINGHUA Two Flutes Straight Slot End Mill 8X8X42X80
Tungsten-steel carbide end mill with two straight flutes for CNC engraving and cutting wood, acrylic, PVC, nylon and resin
- TypeRight-Angle Drills
- Two-flute design enables smooth chip evacuation for clean cuts
- Tungsten steel construction provides high hardness for extended tool life
- 8 mm shank and 42 mm flute length suit standard CNC collets
- 80 mm overall length offers reach for deeper engraving operations
- Suitable for acrylic, PVC, nylon, resin, wood and plywood applications
Two-flute carbide end mill for CNC wood routing
This 8 mm diameter cutter has a 42 mm flute length and 80 mm overall length. Two straight flutes clear chips cleanly in wood, plywood, acrylic, PVC, nylon and resin. The tungsten-steel body stays sharp through repeated engraving and profiling passes on a CNC router.
Suited for single-tool CNC jobs in soft materials
Hobbyists and small shops cutting or engraving the listed plastics and woods will get clean edges with one tool. Buyers who need to machine aluminium, steel or composites should look at a different cutter. Operations requiring ball-nose, tapered or multi-flute profiles are not covered by this geometry.
8 mm shank diameter decides spindle fit
The cutter shank is 8 mm, so the machine collet or chuck must accept that exact size. If the spindle uses a different shank standard the tool cannot be held securely. No other dimension in the spec determines compatibility.
Highlights
- Two-flute design enables smooth chip evacuation for clean cuts
- Tungsten steel construction provides high hardness for extended tool life
- 8 mm shank and 42 mm flute length suit standard CNC collets
- 80 mm overall length offers reach for deeper engraving operations
- Suitable for acrylic, PVC, nylon, resin, wood and plywood applications
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How can I confirm the 8 mm shank end mill is cutting cleanly after installing it in my CNC router?
Run a test pass on scrap wood or acrylic at the recommended feed rate; a smooth edge with no chatter or burn marks shows the two-flute carbide cutter is engaged correctly.
What comes in the package and do I need to buy any collets or holders separately?
The box contains one 8 mm diameter, 80 mm overall length tungsten-steel end mill with a 42 mm flute length; any ER collet or tool holder matching the 8 mm shank must be sourced separately.
Which dimensions should I match when choosing this cutter for my project?
Select this tool when your job requires an 8 mm cutting diameter, 42 mm flute length and 80 mm total length with a straight two-flute profile for wood, acrylic, PVC, nylon or resin.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
