YINGHUA
YINGHUA Two Flutes Straight Slot End Mill 6x6x52x80mm
A two-flute carbide end mill for CNC engraving and cutting wood, acrylic, PVC, nylon and resin, sized 6x6x52x80 mm
- TypeRight-Angle Drills
- Two-flute design clears chips fast for smoother wood cuts
- Tungsten steel construction keeps edges sharp through abrasive materials
- 52 mm flute length reaches deep into thick stock
- 80 mm overall length fits standard CNC collets
- Suited for acrylic, PVC, nylon, resin, wood and plywood
YINGHUA 6 mm Two-Flute End Mill
This carbide milling cutter has a 6 mm shank and 52 mm cutting length for wood CNC engraving. The two-flute geometry clears chips efficiently in soft materials. It suits hobbyists and small workshops that need precise profiling on plywood, acrylic or resin. Buyers needing larger diameters or different flute counts should look elsewhere.
Check shank compatibility and material suitability
Verify that your CNC spindle or router collet accepts a 6 mm shank before ordering. The tool is rated for engraving and cutting fine acrylic, PVC, nylon, resin, wood and plywood only. It must not be used on ferrous metals or other hard materials. Operators must be at least 18 years old and follow industrial cutting safety guidelines.
Single-piece packaging with no extras
The product ships as one cutter without additional accessories, collets or software. No coatings or surface treatments are mentioned in the specifications. The tungsten-steel construction provides the stated hardness and wear resistance for the listed applications. All performance depends on correct machine setup and feed rates.
Highlights
- Two-flute design clears chips fast for smoother wood cuts
- Tungsten steel construction keeps edges sharp through abrasive materials
- 52 mm flute length reaches deep into thick stock
- 80 mm overall length fits standard CNC collets
- Suited for acrylic, PVC, nylon, resin, wood and plywood
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Does the 6 mm shank end mill come alone or with extra cutters in the box?
The product is supplied as a single 6 mm shank carbide end mill with no additional cutters included.
Is the 6x6x52x80 mm size the only version offered for this two-flute straight slot cutter?
Yes, the listed 6 mm diameter, 52 mm flute length and 80 mm overall length is the sole variant available.
What does the 52 mm flute length mean when the tool is mounted in a CNC router?
It allows up to 52 mm of cutting depth in materials such as wood, acrylic, PVC, nylon, resin or plywood before the shank contacts the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
