YINGHUA
YINGHUA Two Flutes Straight Slot End Mill 6X6X42X70
Carbide two-flute end mill cuts wood, acrylic, PVC and similar materials on CNC routers with 42 mm flute length and 70 mm overall length
- TypeRight-Angle Drills
- Two-flute design enables smooth chip evacuation for cleaner cuts
- Tungsten steel construction provides high hardness and wear resistance
- 42 mm cutting length suits deep pocket milling in wood and plastics
- 70 mm overall length fits standard CNC collets and holders
- Right-angle drill compatibility allows versatile use across machine setups
CNC Milling Cutter for Wood and Plastics
This two-flute straight-slot end mill is made from tungsten steel for CNC engraving and cutting tasks. It suits workshops and makers working with wood, plywood, acrylic, PVC, nylon and resin. The cutter is intended for industrial use only and is not for anyone under 18 years of age.
Thermals Noise and Power Draw
The cutter has no motor, fan or electronics, so it produces no noise or heat of its own and draws no power. Thermal load and acoustic output depend entirely on the CNC spindle and feed rates chosen by the operator. Power consumption is determined by the machine driving the tool.
Single-Piece Tooling With No Extras
The package contains one carbide end mill and no additional accessories, software or documentation. Buyers who need multiple diameters, flute counts or coated variants must source those separately. There are no bundled collets, wrenches or CAD/CAM licences included.
Highlights
- Two-flute design enables smooth chip evacuation for cleaner cuts
- Tungsten steel construction provides high hardness and wear resistance
- 42 mm cutting length suits deep pocket milling in wood and plastics
- 70 mm overall length fits standard CNC collets and holders
- Right-angle drill compatibility allows versatile use across machine setups
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How is the 6 mm shank end mill secured in a CNC collet and which step is often missed?
Insert the 6 mm shank fully into an ER collet, tighten the nut to the recommended torque, and verify run-out before starting — skipping the run-out check is the common error.
When should the carbide flutes be replaced during wood and acrylic routing?
Replace the cutter when edge chipping appears, feed resistance rises, or surface finish degrades on plywood, PVC or resin — visual inspection after each job catches wear early.
What cutting-depth limit appears first during a long engraving session?
The 42 mm flute length sets the maximum single-pass depth; exceeding it causes deflection and overheating in wood, acrylic or nylon.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
