YINGHUA
YINGHUA Two Flutes Straight Slot End Mill 6X6X22X50
Two-flute carbide end mill for CNC engraving and cutting wood, acrylic and plastics
- TypeRight-Angle Drills
- Two-flute design enables smoother chip evacuation during engraving
- Tungsten steel construction delivers high hardness for abrasive materials
- 22 mm cutting length handles deeper passes in wood and acrylic
- 50 mm overall length fits standard CNC collets and holders
- Right-angle drill type suits precision profiling in PVC and nylon
Tungsten-Steel CNC End Mill for Wood and Plastics
This two-flute straight-slot carbide cutter is designed for engraving and fine cutting in wood, plywood, acrylic, PVC, nylon and resin. It suits CNC operators and hobbyists who need a single precision tool for detailed routing work in softer materials.
Check Shank Diameter and Machine Compatibility
Verify that your CNC spindle or collet accepts a 6 mm shank before ordering. Ensure the 22 mm cutting length and 50 mm overall length suit your machine's Z-axis travel and workpiece thickness. The tool is rated for industrial use only and must not be used by anyone under 18.
Replaces Worn or Incorrect Profile Bits
Swap this in when an existing end mill shows dull edges, chipping or an unsuitable flute geometry for clean finishes in the listed materials. The jump is worth it if your current cutter leaves tear-out on plywood or melts acrylic, and you need a dedicated two-flute carbide option for those specific substrates.
Highlights
- Two-flute design enables smoother chip evacuation during engraving
- Tungsten steel construction delivers high hardness for abrasive materials
- 22 mm cutting length handles deeper passes in wood and acrylic
- 50 mm overall length fits standard CNC collets and holders
- Right-angle drill type suits precision profiling in PVC and nylon
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What is included in the package and what must be purchased separately?
The box contains one 6X6X22X50 two-flute straight-slot carbide end mill; no collets, tool holders or additional cutters are supplied.
Which cutter specification should I choose for my CNC work?
The single listed specification is a 6 mm shank, 6 mm cutting diameter, 22 mm flute length and 50 mm overall length — select this if those dimensions match your tool holder and material thickness.
How does the 22 mm flute length affect cutting depth in wood or acrylic?
It allows a maximum single-pass cutting depth of 22 mm in materials such as wood, plywood, acrylic, PVC, nylon or resin before the shank contacts the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
