YINGHUA
YINGHUA Two Flutes Straight Slot End Mill 6X6X15X50
A single two-flute tungsten-steel end mill, 6 mm shank and cut length, 15 mm flute, 50 mm overall, for CNC engraving wood, acrylic, PVC, nylon, resin and plywood
- TypeRight-Angle Drills
- Two flutes enable smooth chip evacuation during engraving
- Tungsten steel construction resists wear on abrasive materials
- 15 mm cutting length suits shallow profiling tasks
- Cuts acrylic, PVC, nylon, resin, wood and plywood
- 50 mm overall length fits standard CNC tool holders
Two-flute carbide end mill for CNC wood routing
This tungsten-steel cutter is designed for precise engraving and fine cutting on wood, plywood, acrylic, PVC, nylon and resin. It suits hobbyists and small workshops running desktop or benchtop CNC routers that need a single replaceable tool for detailed work.
Shank and collet compatibility check
Verify that your router or spindle accepts a 6 mm shank and that the collet or chuck grips it securely. Confirm the machine can run at speeds suitable for carbide tooling in the listed materials and that the 15 mm cutting length and 50 mm overall length fit within your Z-axis travel and workpiece thickness. Not for operators under 18 years of age.
Replaces worn or single-flute cutters
Swap this in when an existing end mill shows dull edges, chipping or poor finish on the materials above. The two-flute geometry clears chips efficiently in wood and plastics, giving a cleaner cut than single-flute tools in the same diameter. The jump is worthwhile when finish quality matters more than maximum material-removal rate.
Highlights
- Two flutes enable smooth chip evacuation during engraving
- Tungsten steel construction resists wear on abrasive materials
- 15 mm cutting length suits shallow profiling tasks
- Cuts acrylic, PVC, nylon, resin, wood and plywood
- 50 mm overall length fits standard CNC tool holders
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Does the 6X6X15X50 end mill arrive as a single cutter or do I need to buy collets or holders separately?
The listing supplies one two-flute tungsten steel end mill; collets, tool holders or additional cutters are not included.
Should I choose a different flute count or shank size for acrylic and plywood work?
This model is fixed at two flutes with a 6 mm shank; other flute counts or diameters are not offered in this listing.
What does the 15 mm flute length mean for depth of cut in wood and resin?
The 15 mm flute length sets the maximum single-pass cutting depth, so deeper pockets need multiple passes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
