YINGHUA
YINGHUA Two Flutes Straight Slot End Mill 3.175X2X17X38
Tungsten-steel end mill with two straight flutes cuts acrylic, PVC, nylon, resin, wood and plywood on CNC routers
- TypeRight-Angle Drills
- Precise engraving on wood and acrylic with two-flute carbide design
- Durable tungsten steel construction resists wear during CNC cutting
- 17 mm cutting length handles fine detail work
- 38 mm overall length fits standard CNC collets
- Safe industrial use for operators aged 18 and above
Two-flute carbide end mill for CNC wood
This two-flute straight-slot end mill is a tungsten-steel cutter sized 3.175X2X17X38 for CNC engraving and cutting. It handles acrylic, PVC, nylon, resin, wood and plywood in a single pass. The right-angle drill type suits precision routing on desktop and bench-top machines. Supplied as one new piece for immediate workshop use.
Replaces worn or single-flute bits
Swap out dull single-flute cutters when edge finish degrades or chip evacuation slows on fine-detail work. The two-flute geometry clears chips faster in wood and plastics, reducing re-cutting and heat buildup. The upgrade is worth it when engraving depth reaches 17 mm and a cleaner bottom surface is required. Tungsten steel retains sharpness longer than standard carbide on abrasive composites.
For hobby CNC owners cutting soft materials
Makers engraving acrylic, PVC, nylon, resin, wood or plywood up to 17 mm deep will benefit from the flute count and tungsten-steel wear resistance. Not for buyers who need more storage or builders who need a second card for heavy metal milling. Not for operators under 18 years or for hazardous-article cutting. Industrial-grade ferrous-metal jobs demand a different tool class.
Highlights
- Precise engraving on wood and acrylic with two-flute carbide design
- Durable tungsten steel construction resists wear during CNC cutting
- 17 mm cutting length handles fine detail work
- 38 mm overall length fits standard CNC collets
- Safe industrial use for operators aged 18 and above
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What shank diameter does the 3.175X2X17X38 end mill need in a collet?
The cutter has a 3.175 mm shank, so use a 3.175 mm ER collet or a 1/8 inch collet with a reducing sleeve for a secure grip.
How deep should the 17 mm flute length be inserted into the tool holder before tightening?
Clamp on the shank only — keep the 17 mm cutting section clear of the collet so run-out stays low and the flute does not bottom out.
When should the tungsten-steel cutter be replaced during acrylic or plywood CNC work?
Replace it when edges dull, chip load rises, or finish quality drops on acrylic, PVC, nylon, resin, wood or plywood.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
