YINGHUA
YINGHUA Two Flutes Straight Slot End Mill 3.175X12X38
Two-flute carbide end mill with 3.175 mm shank and 12 mm cutting length for CNC engraving wood, acrylic and plastics
- TypeRight-Angle Drills
- Two-flute design clears chips efficiently for smooth wood engraving
- Tungsten steel construction resists wear during abrasive material cutting
- 175 mm shank fits standard CNC collets without adapters
- 12 mm cutting length handles acrylic, PVC and plywood in one pass
- 38 mm overall length keeps tool rigid for precise resin and nylon profiling
Two-flute carbide end mill for CNC woodwork
This 3.175 mm two-flute straight-slot end mill is made from tungsten steel for CNC engraving and cutting. It suits hobbyists and light-industrial users who need a single, replaceable cutter for fine detail work on softer materials.
12 mm cutting length and 38 mm overall length
The 12 mm flute length gives enough reach for shallow pockets, engraving passes and through-cuts in acrylic, PVC, nylon, resin, wood and plywood. Deeper profiles or heavy stock removal will exceed the available flute length and require a longer tool.
Direct replacement for worn 3.175 mm two-flute
Swapping a dull cutter of the same diameter and flute count restores clean edges and dimensional accuracy without changing toolpaths. The jump is worth it when the current tool shows chipping, burning or increased cutting forces on the listed materials.
Highlights
- Two-flute design clears chips efficiently for smooth wood engraving
- Tungsten steel construction resists wear during abrasive material cutting
- 175 mm shank fits standard CNC collets without adapters
- 12 mm cutting length handles acrylic, PVC and plywood in one pass
- 38 mm overall length keeps tool rigid for precise resin and nylon profiling
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
Will the 3.175 mm shank fit my older CNC collet?
The shank diameter is 3.175 mm; match it to your collet size for a secure hold.
How can I confirm the cutter is performing correctly after installation?
Run a test cut in wood or acrylic; clean edges and minimal vibration indicate proper engagement.
Does the package include any collets or only the single cutter?
The box contains one carbide end mill; collets or tool holders must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
