YINGHUA
YINGHUA Two Flutes Straight Slot End Mill 1piece 3.175X1.5X6X38
A two-flute carbide end mill for CNC engraving and cutting wood, acrylic, PVC, nylon and resin with a 3.175 mm shank and 38 mm overall length
- TypeRight-Angle Drills
- Two-flute design clears chips efficiently for smooth cuts
- Tungsten steel construction resists wear during extended CNC routing
- 175 mm shank fits standard collets without adapters
- Cuts acrylic, PVC, wood and plywood in a single tool
- Not for users under 18 — industrial cutting only
YINGHUA Carbide End Mill 3.175 mm Shank
This single-flute carbide end mill has a 3.175 mm shank and 38 mm overall length for wood CNC engraving and cutting. The tungsten steel construction resists wear during fine detail work on acrylic, PVC, nylon, resin, wood and plywood. Two straight flutes give a clean slot cut in softer materials.
For hobby CNC users cutting non-metallics
Makers running desktop routers for sign-making, model parts or prototype panels will find the cutter suited to light-duty engraving. It is not intended for ferrous metals, hardened alloys or high-volume production where coolant and rigid tool holders are required. Buyers needing larger diameters or multi-flute roughing profiles should select a different tool.
1.5 mm cutting diameter for fine detail
The 1.5 mm flute diameter determines the smallest internal radius and the narrowest slot the tool can produce. This dimension fixes the level of detail achievable in intricate patterns and lettering.
Highlights
- Two-flute design clears chips efficiently for smooth cuts
- Tungsten steel construction resists wear during extended CNC routing
- 175 mm shank fits standard collets without adapters
- Cuts acrylic, PVC, wood and plywood in a single tool
- Not for users under 18 — industrial cutting only
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How can I verify the 3.175 mm shank end mill is cutting correctly after installing it in my CNC machine?
Run a test cut in wood or acrylic and check for clean edges without chatter; the two-flute carbide design should leave a smooth finish at the stated 1.5 mm cutting diameter.
What comes in the package and what additional items are needed to use this 38 mm overall length cutter?
The box contains one tungsten-steel two-flute straight-slot end mill; you must supply a compatible CNC router or spindle with a 3.175 mm collet and appropriate work-holding for the material.
Which specifications should I match when choosing this 3.175X1.5X6X38 end mill for my project?
Select this model when your machine accepts a 3.175 mm shank, you need a 1.5 mm cutting diameter, 6 mm flute length and 38 mm overall length for engraving wood, acrylic, PVC, nylon or resin.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
