YINGHUA
YINGHUA Two Flute Straight Slot End Mill 8X8X32X60
Tungsten-steel two-flute end mill, 1 piece 8X8X32X60, for CNC engraving and cutting wood, acrylic, PVC, nylon and resin
- TypeRight-Angle Drills
- Two flutes give smoother cuts in wood and plastic
- 8 mm shank fits standard CNC collets
- 32 mm flute length handles deeper profiles
- 60 mm overall length provides stable reach
- Tungsten steel construction resists wear during engraving
Tungsten-Steel CNC End Mill
This single-flute carbide end mill is built from tungsten steel for rigid, repeatable cutting on CNC routers. The two-flute straight-slot geometry clears chips efficiently while maintaining a clean edge on each pass. It is supplied as a single piece ready for direct collet mounting.
Wood, Plastic and Soft-Material Engraving
The cutter handles acrylic, PVC, nylon, resin, wood and plywood with consistent finish quality. It is not suited for ferrous metals, hardened alloys or high-temperature super-alloys where carbide grades and coatings differ. Buyers needing multi-flute roughing profiles or specialised coatings should look at alternative tooling.
Ready-to-Use Single Unit
No collets, bushings or software licences are included in the package. The tool arrives sharpened and dimensioned at 8X8X32X60 so it can be clamped and run immediately. Operators must observe the age restriction of 18 years and confine use to industrial cutting applications.
Highlights
- Two flutes give smoother cuts in wood and plastic
- 8 mm shank fits standard CNC collets
- 32 mm flute length handles deeper profiles
- 60 mm overall length provides stable reach
- Tungsten steel construction resists wear during engraving
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
What size collet or tool holder is required for the 8 mm shank on this end mill?
The cutter has an 8 mm shank, so you need an 8 mm ER collet or a matching 8 mm tool holder on your CNC spindle.
Will the 32 mm cutting length reach through the material thickness I normally machine on my existing CNC router?
With a 32 mm flute length, the tool can plunge or profile up to that depth in a single pass, provided your Z-axis travel and workpiece clamping allow it.
How can I confirm the cutter is performing correctly after installation?
Listen for smooth, consistent cutting noise, inspect the finished edge for clean chips without tear-out, and verify the tool runs without excessive vibration at your chosen feed and speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
