YINGHUA
YINGHUA Right-Angle Drill Bit 5X17X50MM
Two-flute up-and-down spiral carbide cutter mills wood, plywood and particleboard with a 50 mm cutting length
- TypeRight-Angle Drills
- Tungsten steel construction withstands heavy cutting loads
- Up-and-down spiral flutes compress material for cleaner edges
- 50 mm cutting length handles deep profiles in one pass
- 17 mm flute length clears chips efficiently in dense boards
- Suitable for wood, plywood, particleboard and solid timber
Right-Angle Drill Bit 5X17X50MM
The YINGHUA right-angle drill bit is a tungsten-steel milling cutter built for CNC machinery. Its up-and-down compression spiral suits wood, plywood, density board, solid wood and particleboard. The tool is intended for industrial cutting only and must not be used by anyone under 18 years of age.
Single Independent Package
The cutter ships in a single independent package containing one up-and-down compound milling cutter. No extra accessories, collets or software are bundled, so the operator must supply any required tool-holding hardware separately.
17 mm Cutting Length
The 17 mm cutting length determines the maximum depth of cut in a single pass and therefore decides whether the bit matches the workpiece thickness and machine travel. Buyers needing deeper engagement or a different shank diameter must select another cutter.
Highlights
- Tungsten steel construction withstands heavy cutting loads
- Up-and-down spiral flutes compress material for cleaner edges
- 50 mm cutting length handles deep profiles in one pass
- 17 mm flute length clears chips efficiently in dense boards
- Suitable for wood, plywood, particleboard and solid timber
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
When will the tungsten-steel flutes on this 5X17X50MM right-angle bit need replacing?
Replace the cutter when the up-and-down spiral edges no longer leave clean edges in wood, plywood, density board, solid wood or particleboard.
What stops a continuous cut first in solid wood with this carbide mill cutter?
The 17 mm flute length limits chip evacuation, so deep passes clog before the tool overheats.
How hot or loud does the 50 mm shank bit get during all-day CNC routing?
Tungsten steel runs cooler than high-speed steel, and the two-flute compression design reduces vibration noise in wood and PVC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
