YINGHUA
YINGHUA Right-Angle Drill 6x32x60mm
A right-angle drill with a 6 mm shank, 32 mm cutting length and 60 mm overall length for CNC routing of wood, acrylic and PVC
- TypeRight-Angle Drills
- Precise cutting with 32 mm flute length
- Clean edges from up-down spiral geometry
- Durable tungsten steel construction resists wear
- Versatile for acrylic, PVC and wood boards
- Ready to use with single flute CNC bit
6×32×60 mm Right-Angle Drill
This carbide milling cutter measures 6 mm shank diameter, 32 mm flute length and 60 mm overall length. It features an up-down compound single-flute spiral geometry designed for compression cutting in wood and board materials. The tool is supplied new as a single piece for CNC router use.
CNC operators cutting wood, acrylic.
The one-flute design evacuates chips quickly in softer sheet stock but lacks the rigidity for heavy metal removal or high-feed roughing. Buyers who need multi-flute finishes, coolant-through capability or shank sizes other than 6 mm should look at alternative tooling.
32 mm flute length
This dimension sets the maximum depth of cut in a single pass and determines whether the bit reaches through your workpiece without bottoming out on the collet. Verify the required cutting depth against the 32 mm flute before ordering.
Highlights
- Precise cutting with 32 mm flute length
- Clean edges from up-down spiral geometry
- Durable tungsten steel construction resists wear
- Versatile for acrylic, PVC and wood boards
- Ready to use with single flute CNC bit
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How do I fit the 6 mm shank into my CNC collet without damaging the flute?
Loosen the collet fully, insert the shank until the flute clears the collet face, then tighten evenly so the cutter runs true and the up-down spiral stays centred.
When should I replace this carbide router bit?
Replace the bit when the cutting edges show visible rounding, chipping or when cut quality on wood and acrylic deteriorates despite correct feed rates.
What limits continuous cutting depth with the 32 mm flute length?
The 32 mm flute length sets the maximum single-pass depth; deeper cuts require multiple passes to avoid tool deflection and overheating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
