YINGHUA
YINGHUA Right-Angle Drill 3.175X15X38mm
A tungsten-steel right-angle drill bit with up-down spiral flutes for compression cutting of wood, acrylic and PVC boards
- TypeRight-Angle Drills
- Right-angle design reaches tight spaces
- One-flute spiral clears chips fast for smooth cuts
- Tungsten steel carbide resists wear on abrasive boards
- Cuts acrylic, PVC, density board and wood
- 175 mm shank fits standard CNC collets
Right-Angle Drill for CNC Machinery
This right-angle drill is a 3A UP DOWN compound one-flute spiral carbide mill tool cutter. It is designed as a replacement for CNC machinery and is intended for industrial cutting applications. The tool is made of tungsten steel for high construction quality. Buyers who need a multi-flute design or a different shank diameter will not be served by this single-flute cutter.
3.175 mm Shank Fits Compatible Collets
The cutter has a 3.175 mm shank that fits directly into matching collets and tool holders on CNC routers. Its 38 mm overall length and 15 mm cutting length determine the reach and depth of cut available in a setup. The up-down compression geometry helps reduce tear-out on both faces of the workpiece. Builders who require a longer cutting length or a larger shank size cannot use this tool.
Tungsten Steel Cuts Wood, Acrylic and PVC
The tungsten steel construction handles cutting of acrylic, PVC, density board and wood board in normal use. The single-flute spiral design evacuates chips from the cut zone during operation. The product is not for use by people under 18 years of age and is only for industrial cutting of non-hazardous articles. Users who need to cut metal, composite or hazardous materials must select a different cutter.
Highlights
- Right-angle design reaches tight spaces
- One-flute spiral clears chips fast for smooth cuts
- Tungsten steel carbide resists wear on abrasive boards
- Cuts acrylic, PVC, density board and wood
- 175 mm shank fits standard CNC collets
Specifications
| Type | Right-Angle Drills |
|---|
Questions about this item
How deep can the 15 mm flute cut before the bit needs clearing?
The single 15 mm flute removes material in one pass; withdraw the bit to clear chips once the cut reaches that depth.
Does the tungsten-steel body stay cool during continuous CNC routing?
Carbide dissipates heat efficiently, but sustained high-speed runs still require spindle pauses or coolant to prevent overheating.
What collet size matches the 3.175 mm shank on this cutter?
A 3.175 mm (1/8 inch) ER collet or shrink-fit holder is needed to secure the shank in your CNC spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
